Table of Contents
Advertisement
8800 Series Chassis Switch Hardware Installation Guide
Remove all four restraining bolts that hold the XCM8810 chassis to the shipping brackets on
4.
the shipping pallet.
Figure 23. Removing the restraining bolts
At each side of the chassis, place one hand in an empty power supply bay and the other
5.
hand in the recessed hand-hold on the back panel of the XCM8810 chassis (see
Correct method for lifting the XCM8810
CAUTION:
Do not use the fan tray handle to lift or maneuver the XCM8810 chassis.
This handle is not designed to support the weight of the chassis.
Carefully lift the chassis off the shipping pallet and onto the floor as shown in the following
6.
figure.
Figure 24. Correct method for lifting the XCM8810 Chassis
Chassis).
Chapter 5. Install an 8800 Series Chassis
Figure 24,
| 47
Advertisement
Table of Contents
