Table of Contents
Advertisement
8800 Series Chassis Switch Hardware Installation Guide
Unpack the XCM8806 Chassis
CAUTION:
The XCM8806 chassis weighs almost 65 pounds. Proper lifting and
moving of the chassis requires two people.
To unpack the XCM8806 chassis:
Open the top flaps and remove the accessories and documentation pack from the
1.
shipping carton. Lift out the packing foam.
Figure 16. Removing accessories from the XCM8806 Chassis shipping carton
Remove the plastic clip locks at the bottom of the carton.
2.
a. In each clip lock, squeeze the prongs together firmly.
b. Pull the clip lock outward from the carton.
Figure 17. Clip locks on the XCM8806 Chassis shipping carton
Chapter 5. Install an 8800 Series Chassis
| 43
Advertisement
Table of Contents
