Table of Contents
Advertisement
8800 Series Chassis Switch Hardware Installation Guide
Set the corner braces in place and slide the top of the shipping carton down and over the
8.
chassis.
Figure 73. Placing the carton over the XCM8806 Chassis
Insert the clip locks.
9.
a. Squeeze the prongs together in the middle of the clip lock.
b. Push the clip lock into the carton opening and release the prongs.
Repeat these steps to insert each of the remaining clip locks.
CAUTION:
Proper installation of the clip locks is critical for safe shipment of the
XCM8806 chassis. Make sure that the clip locks are secure and accurately
installed.
Place the packing foam material on top of the chassis.
10.
Close the top flaps on the shipping carton and seal them with packing tape.
11.
Chapter 12. Repack an 8800 Series Chassis
| 105
Advertisement
Table of Contents
