NETGEAR 8800 Series Hardware Installation Manual page 51

8800 Series Chassis Switch Hardware Installation Guide
To ground the chassis:
Locate the grounding point on the back of the chassis
1.
Figure 28. Back of XCM8806 Chassis
Figure 29. Back of XCM8810 Chassis
Strip 0.5-inch (1.2-cm) of insulation from the stranded copper wire cable.
2.
Insert the stripped wire into the cable lug.
3.
(Figure 28
Chapter 5. Install an 8800 Series Chassis
and
Figure 29).
| 51