Table of Contents
Advertisement
8800 Series Chassis Switch Hardware Installation Guide
Remove the XCM8806 Power Cord Retainer
To remove the power cord retainer:
Attach the ESD-preventive wrist strap to your wrist and connect the metal end to the
1.
ground receptacle on the top-left corner of the switch front panel.
Using a #2 Phillips screwdriver, loosen the captive screw located on each end of the power
2.
cord retainer.
Remove the retainer from the switch.
3.
Leave the ESD-preventive wrist strap permanently connected to the
Note:
switch, so that the strap is always available when you need to
handle ESD-sensitive components.
Chapter 9. AC Power Cord Retainers
| 87
Advertisement
Table of Contents
