Table of Contents
Advertisement
8800 Series Chassis Switch Hardware Installation Guide
8800 Series 10-slot Chassis Switch XCM8810
The XCM8810 chassis includes the following physical features:
One 10-slot chassis with backplane
•
Eight dedicated I/O module slots, labeled 1, 2, 3, 4, 7, 8, 9 and 10
•
One dedicated Supervisory module slot, labeled 5/A
•
One dual-use slot for an I/O module or Supervisory module, labeled 6/B.
•
Power supply bay that accommodates up to six power supplies, accessed from the front
•
of the unit
One fan tray, accessed from the front right of the unit
•
One connector for an ESD-preventive wrist strap
•
Depending on the Supervisory modules and I/O modules installed, the XCM8810 chassis can
support up to 48 gigabits per second of bandwidth per slot.
The following figure shows the front of a XCM8810 chassis equipped with two Supervisory
modules and three I/O modules.
Figure 3. Front of the XCM8810 Chassis
Chapter 1. About the 8800 Series Chassis Switches
| 11
Advertisement
Table of Contents
