Page 1 M o d el s G S 1 0 8Tv 3 G S 1 1 0T P v 3 G S 1 1 0T P P NETGEAR, Inc. August 2019 350 East Plumeria Drive 202-11992-02 San Jose, CA 95134, USA...
Page 2 Do not use this device outdoors. If you connect cables or devices that are outdoors to this device, see http://kb.netgear.com/000057103 for safety and warranty information. Trademarks © NETGEAR, Inc., NETGEAR, and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only. Revision History...
Page 3: Table Of Contents
Use a Mac with Bonjour to access the switch on-network ...22 Use the NETGEAR Insight app to discover the switch....24 Use the NETGEAR Switch Discovery Tool to discover the switch .
Page 4 Cloud Management Access the NETGEAR support website ......48 Access the user manual online ........49 Chapter 2 Configure System Information View or define system information .
Page 5 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Configure Link Layer Discovery Protocol ......110 Configure LLDP global settings .
Page 6 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Configure the CST settings ........180 Configure the CST port settings .
Page 7 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Configure VLAN routing .........243 Create a routing interface with the VLAN Static Routing Wizard .
Page 8 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Configure an HTTP authentication list ......313 Configure an HTTPS authentication list .
Page 9 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Perform a cable test......... . 422 Configure and view the logs .
Page 10 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Appendix B Specifications and Default Settings Switch default settings ......... 480 General feature default settings .
Page 11: Chapter 1 Get Started
Get Started This user manual describes how you can configure and operate the following NETGEAR Smart Managed Pro Switches by using the local browser–based management interface: • GS108Tv3. NETGEAR 8-Port Gigabit Ethernet Smart Managed Pro Switch with Cloud Management •...
Page 12: Available Publications
The following guides are available at netgear.com/support/download/: • Installation Guide • Hardware Installation Guide For information about the NETGEAR Insight app and Insight Cloud portal, visit netgear.com/insight and netgear.com/support/product/Insight.aspx. For knowledge base articles about NETGEAR Insight, visit netgear.com/support. Get Started User Manual...
Page 13: Model Descriptions
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Model descriptions The NETGEAR Smart Managed Pro Switches that are described in this manual differ in the following ways: • GS108Tv3. 8-Port Gigabit Ethernet Smart Managed Pro Switch with Cloud Management This model provides eight Gigabit RJ-45 copper ports and is Insight-manageable.
Page 14: Switch Management Options And Default Management Mode
You can also choose to manage the switch by using the NETGEAR Insight app on a smartphone or tablet. Or, if you are an Insight Premium or Pro subscriber, you can choose to manage the switch from the Insight Cloud portal that is available from a web browser on your Windows-based computer, Mac, or tablet.
Page 15: Manage The Switch By Using The Local Browser Interface
This manual describes how to use the local browser interface to manage and monitor the switch. For information about using the NETGEAR Insight app and Insight Cloud portal to manage the switch, visit netgear.com/insight and netgear.com/support/product/Insight.aspx. For knowledge base articles about NETGEAR Insight, visit netgear.com/support.
Page 16: Navigation Tabs, Configuration Menus, And Page Menu
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Navigation tabs, configuration menus, and page menu The System Information page is the start page in the local browser interface. The following figure shows the System Information page for model GS110TPv3.
Page 17: Configuration And Status Options
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Link Submenu links Figure 2. Switch page menu link and submenu links Configuration and status options The area directly under the configuration menus and to the right of the links displays the configuration information or status for the page you select.
Page 18: User-Defined Fields
Before you can access the full menu of the local browser interface, you must connect the switch to a network with Internet access at least once so that you can register the switch with NETGEAR and unlock the full menu. Get Started...
Page 19: Access The Switch On-Network And Connected To The Internet
IP address of the switch on the network: • NETGEAR Insight app. You can install the NETGEAR Insight app on an iOS or Android mobile device and discover the IP address of the switch. See Use the NETGEAR Insight app to discover the switch on page 24.
Page 20: Use A Windows-Based Computer To Access The Switch On-Network
NETGEAR Insight app and Insight Cloud portal. You can change the management mode of the switch so that you can use the NETGEAR Insight app and Insight Cloud portal to manage the switch remotely. For more information, see Change the management mode of the switch on page 37.
Page 21 10. Enter one of the following credentials: • NETGEAR email address and password. If this is the first time that you log in to the local browser interface, click the Login button, and follow the directions onscreen to register the switch with your NETGEAR email address and password.
Page 22: Use A Mac With Bonjour To Access The Switch On-Network
Bookmarks > Bonjour > Webpages GSmodel (xx:xx:xx:xx:xx:xx) depending on your Mac OS version. The NETGEAR Business page opens. 10. If your browser does not open the NETGEAR Business page but displays a security message and does not let you proceed, do one of the following: •...
Page 23 11. Enter one of the following credentials: • NETGEAR email address and password. If this is the first time that you log in to the local browser interface, click the Login button, and follow the directions onscreen to register the switch with your NETGEAR email address and password.
Page 24: Use The Netgear Insight App To Discover The Switch
3. Open the NETGEAR Insight app. 4. If you did not set up a NETGEAR account, tap Create NETGEAR Account and follow the onscreen instructions. 5. Enter the email address and password for your account and tap LOG IN.
Page 25 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The NETGEAR Switch Discovery Tool lets you discover the switch in your network and access the local browser interface of the switch from a Mac or a 64-bit Windows-based computer.
Page 26: Discover The Switch In A Network With A Dhcp Server Using
Cloud Management Tip: After you complete the initial log-in process (see Register and access the switch with your NETGEAR account on page 34), you can access the local browser interface from the Switch Discovery Tool by clicking the ADMIN PAGE button next to your switch.
Page 27: Discover The Switch In A Network Without A Dhcp Server Using The Smart Control Center
Cloud Management Tip: After you complete the initial log-in process (see Register and access the switch with your NETGEAR account on page 34), you can access the local browser interface from the SCC by selecting your switch in the SCC and clicking the Web Browser Access button.
Page 28: Use Other Options To Discover The Switch Ip Address
IP address on page 29. Tip: After you complete the initial log-in process (see Register and access the switch with your NETGEAR account on page 34), you can access the local browser interface from the SCC by selecting your switch in the SCC and clicking the Web Browser Access button.
Page 29: Access The Switch On-Network When You Know The Switch Ip Address
4. Enter one of the following credentials: • NETGEAR email address and password. If this is the first time that you log in to the local browser interface, click the Login button, and follow the directions onscreen to register the switch with your NETGEAR email address and password.
Page 30: Access The Switch Off-Network
Cloud Management • Local device password. If you previously logged in to the local browser interface and registered the switch with your NETGEAR email address and password, enter the local device password. By default, the local device password is password.
Page 31 IP settings of your computer to be in the same subnet as the static IP address. For more information about changing the IP settings on your computer, see one of the following knowledge base articles at the NETGEAR website: • Windows-based computer. See the following article: https://kb.netgear.com/27476/How-to-set-a-static-IP-address-in-Windows...
Page 32: Credentials For The Local Browser Interface
We recommend that you register and access the switch with your NETGEAR account (see Register and access the switch with your NETGEAR account on page 34) so that all features of the local browser interface are available. After you register the switch, you can access the local browser interface with the local device password and you no longer need to use your NETGEAR account credentials for that purpose.
Page 33: Netgear Insight And The Credentials For The Local Browser Interface
Cloud Management NETGEAR Insight and the credentials for the local browser interface If you use NETGEAR Insight, the credentials that you must use to access the switch local browser interface might change: • No credential change: Use NETGEAR Insight to discover but not manage the switch.
Page 34: Overview Of The Credentials For Access To The Local Browser Interface
Limited menu 1. If you change the management mode from NETGEAR Insight Mobile App and Insight Cloud Portal to Direct Connect Web-browser Interface, you must continue to use the Insight network password (for the last Insight network location) to access the local browser interface until you manually change the local device password.
Page 35 5. Click the Login button, and follow the directions onscreen to register the switch with your NETGEAR email address and password. If you did not yet create a NETGEAR account, click the Create button, follow the directions onscreen to create an account, and then register the switch with your NETGEAR email address and password.
Page 36: Change The Language Of The Local Browser Interface
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 37: Change The Management Mode Of The Switch
Insight-manageable, for complex tasks such as integrating with an existing network of devices that are not managed through Insight, and for debugging purposes. When you are done, you can change the management mode back to NETGEAR Insight Mobile App and Insight Cloud Portal.
Page 38: Change The Management Mode To Netgear Insight Mobile App And Insight Cloud Portal
Change the management mode to NETGEAR Insight Mobile App and Insight Cloud Portal To change the management mode of the switch to NETGEAR Insight Mobile App and Insight Cloud portal: 1. Connect your computer to the same network as the switch.
Page 39: Change The Management Mode Back To Directly Connect
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 40: Use The Device View Of The Local Browser Interface
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. Get Started...
Page 41 The Device View page depends on the model: • GS108Tv3. For model GS108Tv3, each port provides a left LED and a right LED that, combined, indicate the link and speed, as described in the following table. Table 4. Device view port LEDs for model GS108Tv3...
Page 42 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management • GS110TPv3. For model GS110TPv3, each port provides a left LED that functions as the combined link and speed LED and a right LED that indicates the PoE status, as described in the following table.
Page 43: Power Led In The Device View
The behavior of the Power LED in the Device View depends on the model: • GS108Tv3 and GS110TPv3. The Power LED is a bicolor LED that serves as an indicator of power. The Power LED must be solid green, indicating the switch is powered on and operating normally.
Page 44: Poe Max Led In The Device View
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management PoE Max LED in the Device View For models GS110TPv3 and GS110TPP, the PoE Max LED indicates the following status: • Off. Sufficient (more than 7W of) PoE power is available. •...
Page 45 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Many of the pages that allow you to configure or view interface settings include links to display all ports, all LAGs, or all ports and LAGs on the page. Use these links as follows: •...
Page 46 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The row for the selected interface is highlighted, and the interface number appears in the heading row. 3. Configure the desired settings. 4.
Page 47 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 4. Click the Apply button. Your settings are saved. To configure all LAGs: 1. Click the LAG link to display only the LAG interfaces. 2.
Page 48: Access The Netgear Support Website
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 49: Access The User Manual Online
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Access the user manual online The user manual (the guide you are now reading) is available at the NETGEAR download center at netgear.com/support/download/. To access the user manual online from the local browser interface: 1.
Page 50: Chapter 2 Configure System Information
Configure System Information This chapter contains the following sections: View or define system information • Configure the IP network settings for management access • Configure the time settings • Configure denial of service settings • Configure DNS settings • Configure green Ethernet settings •...
Page 51: View Or Define System Information
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 52 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 6. Define the following fields: • System Name. Enter the name to identify this switch. You can use up to 255 alphanumeric characters. The default is blank. •...
Page 53: View The Software Versions
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 54: View The System Cpu Status
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 55: Configure The Cpu Thresholds
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The CPU Utilization section shows the memory information, task-related information, and percentage of CPU utilization per task. The following table describes CPU Memory Status information. Table 10.
Page 56 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 57: Configure The Ip Network Settings For Management Access
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 58 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The IP Configuration page displays. 7. Select one of the following radio buttons to specify how the network information for the switch must be configured: •...
Page 59: Configure The Ipv6 Network Settings For The Local Browser
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 60: View The Ipv6 Network Neighbors
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 8. Determine how the switch acquires an IPv6 address: • IPv6 Address Auto Configuration Mode. When this mode is enabled, the network interface can acquire an IPv6 address through IPv6 Neighbor Discovery Protocol (NDP) and through the use of router advertisement messages.
Page 61 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 62: Configure The Time Settings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 63 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 7. Select the Clock Source Local radio button. 8. In the Date field, specify the current date by entering the month, day, and year (MM/DD/YYYY).
Page 64: Configure The Time Settings With Sntp And Configure The Global Sntp Settings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 65 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The local clock can be set to SNTP only if the following two conditions are met: • An SNTP server is configured. •...
Page 66 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 12. In the Broadcast Poll Interval field, specify the number of seconds between broadcast poll requests expressed as a power of 2. Broadcasts received prior to the expiry of this interval are discarded.
Page 67: View The Sntp Global Status
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 68 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 8. Click the Update button to update the page with the latest information about the switch. The following table displays the nonconfigurable SNTP Global Status information. Table 12.
Page 69: Configure An Sntp Server
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Table 12. SNTP Global Status information (continued) Field Description Reference Clock ID The reference clock identifier of the server for the last received valid packet. Server mode The mode of the server for the last received valid packet.
Page 70 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 71 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management address is a DNS host name, then that host name is resolved into an IP address each time an SNTP request is sent to it. 9.
Page 72 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 73 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 74: Configure Daylight Saving Time Settings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 75 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 7. Select a Daylight Saving (DST) radio button: • Disable. Disable daylight saving time. • Recurring. Daylight saving time occurs at the same time every year. The start and end times and dates for the time shift must be manually configured.
Page 76 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Table 14. Daylight saving setting is Recurring, Recurring EU, or Recurring USA Field Description Ends At These fields are used to configure the end values of date and time. •...
Page 77: View The Daylight Saving Time Status
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 78: Configure Denial Of Service Settings
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 7. To refresh the page, click the Update button. The following table displays the nonconfigurable daylight saving status information. Table 16. Daylight Saving (DST) Status information Field Description Daylight Saving (DST)
Page 79: Configure Denial Of Service
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 80 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 81 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management • Denial of Service Max ICMP Packet Size. Specify the maximum ICMPv4 packet size allowed. If ICMPv4 DoS prevention or ICMPv6 DoS prevention is enabled, the switch drops ICMPv4 or ICMPv6 ping packets with a size greater than the configured value.
Page 82: Configure Dns Settings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 83 When the system is performing a lookup on an unqualified host name, this field is provides the domain name (for example, if default domain name is netgear.com and the user enters test, then test is changed to test.netgear.com to resolve the name). The name must not be longer than 255 characters.
Page 84: Remove A Dns Server
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 85: Configure And View Host Name-To-Ip Address Information
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 86 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 87 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 88: Configure Green Ethernet Settings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 89: Configure Green Ethernet Interface Settings
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management For information about the credentials, see Credentials for the local browser interface on page 32. 5. Click the Login button. The System Information page displays. 6.
Page 90 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 91: Use The Device View
(PoE) configuration settings and the PoE settings for each port. Note: For more information about PoE, see the hardware installation guide, which you can download by visiting netgear.com/support/download/. PoE concepts Models GS110TPv3 and GS110TPP include eight PoE plus (PoE+) ports.
Page 92: Device Class Power Requirements
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management to make sure that the devices connected to the higher-priority, lower-numbered PoE+ ports are supported first. It is important to note that although a device is listed as an 802.3at (PoE+) powered or 802.3af (PoE) powered device, it might not require the maximum power limit that is specified.
Page 93 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 94: Activate The New Poe Budget For An Optional Or Replacement Power Adapter (Model Gs110Tpp)
Model GS110TPP comes with a 130W power adapter that provides a PoE power budget of 120W. If you purchase and connect the NETGEAR optional power adapter model EPS200W, you can upgrade the PoE power budget to 190W. After you change the power adapter, you must use the local browser interface to activate the new power adapter that you connected to the switch.
Page 95: Configure The Global Poe Settings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 96 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 4. Enter one of the following passwords: • After registration, enter the local device password. By default, the local device password is password. •...
Page 97: Configure The Poe Port Settings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 98 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The previous figure shows the PoE Port Configuration page for model GS110TPv3. 7. Select one or more interfaces by taking one of the following actions: •...
Page 99 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management detects that the attached PD requests more power than IEEE 802.3af but is not an IEEE 802.3at Class 4 device, the PD does not receive power from the switch. 11.
Page 100 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Table 22. PoE Port Configuration (continued) Field Description Class The class defines the range of power that a powered device (PD) is drawing from the switch.
Page 101: Configure Snmp
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 102 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 6. Select System > SNMP > SNMP V1/V2 > Community Configuration. 7. In the Management Station IP field, specify the IP address of the management station. 8.
Page 103 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 104: Configure Snmpv1 And Snmpv2 Trap Settings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 105 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 106 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 107: Configure Snmpv1 And Snmpv2 Trap Flags
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 108: View The Supported Mibs
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 109: Configure Snmpv3 Users
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 110: Configure Link Layer Discovery Protocol
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The SNMPv3 Access Mode field is a read-only field that shows the access privileges for the user account. Access for the admin account is always Read/Write. Access for all other accounts is Read Only.
Page 111: Configure Lldp Global Settings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 3. Enter one of the following passwords: •...
Page 112: Configure Lldp Port Settings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 113 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 7. Select one or more interfaces by taking one of the following actions: • To configure a single interface, select the check box associated with the port, or type the port number in the Go To Interface field and click the Go button.
Page 114: View The Lldp-Med Network Policy
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 115: Configure The Lldp-Med Port Settings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. Configure System Information...
Page 116: View The Local Information Advertised Through Lldp
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 4. Enter one of the following passwords: • After registration, enter the local device password. By default, the local device password is password. •...
Page 117 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 118 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Field Description System Capabilities The primary functions that the switch supports. Port Information Interface The interface associated with the rest of the data in the row. Port ID Subtype The type of information used to identify the interface in the Port ID field.
Page 119: View The Lldp Neighbors Information
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 120 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management If no information was received from a neighbor device, or if the link partner is not LLDP-enabled, no information displays. The following table describes the information that displays for all LLDP neighbors that were discovered.
Page 121 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Field Description System Capabilities The system capabilities of the remote system. Managed Addresses Address SubType The type of the management address. Address The advertised management address of the remote system.
Page 122: Configure Dhcp Snooping
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Field Description Model Name The model name advertised by the remote device. Asset ID The asset ID advertised by the remote device. Location Information Civic The physical location, such as the street address, that the remote device...
Page 123: Configure The Global Dhcp Snooping Settings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 124: Enable Dhcp For All Member Interfaces Of A Vlan
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. Configure System Information...
Page 125: Configure Dhcp Snooping Interface Settings
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 4. Enter one of the following passwords: • After registration, enter the local device password. By default, the local device password is password. •...
Page 126 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 127: Configure Static Dhcp Bindings
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 9. From the Trust Mode menu, select the desired trust mode: • Disabled. The interface is considered to be untrusted and could potentially be used to launch a network attack.
Page 128 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 129: Configure Dhcp Snooping Persistent Settings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 130: View Or Clear Dhcp Snooping Statistics
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 131: Set Up Poe Timer Schedules
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 6. Select System> Services > DHCP Snooping > Statistics. The DHCP Snooping Statistics page displays. 7. Click the Clear button to clear all interfaces statistics. The following table describes the DHCP snooping statistics.
Page 132: Specify The Settings For An Absolute Poe Timer Schedule
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 133 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 134: Specify The Settings For A Recurring Poe Timer Schedule
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 135 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The fields in the Timer Schedule Configuration section might adjust to let you configure a timer schedule with a recurrence pattern. c. Timer Schedule Entry. To add a new entry, select new. Selecting an existing entry lets you make changes to that entry.
Page 136: Change The Settings For A Recurring Poe Timer Schedule Entry
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 137: Delete A Poe Timer Schedule Entry
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 138: Delete A Poe Timer Schedule
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 139: Chapter 3 Configure Switching
Configure Switching This chapter contains the following sections: Configure the port settings and maximum frame size • Configure link aggregation groups • Configure VLANs • Configure Auto-VoIP • Configure Spanning Tree Protocol • Configure multicast • Manage IGMP snooping • Manage MLD snooping •...
Page 140: Configure The Port Settings And Maximum Frame Size
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 141 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The frame size includes the Ethernet header, CRC, and payload. The range is 1522 to 10000. The default maximum frame size is 1522. 8.
Page 142 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The options are as follows: • Half. Indicates that the interface supports transmission between the devices in only one direction at a time. •...
Page 143: Configure Link Aggregation Groups
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The following table describes the nonconfigurable data that is displayed. Table 27. Port Configuration information Field Description Port Type For normal ports this field is blank. Otherwise, the options are as follows: •...
Page 144 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 145: Configure Lag Membership
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 10. From the Hash Mode menu, select the load-balancing mode for a port channel (LAG): • 1 Src/Dest MAC, incoming port. This mode uses the source MAC address, destination MAC address, and incoming port that are associated with the packet.
Page 146 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 147: Set The Lacp System Priority
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 148: Set The Lacp Port Priority Settings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 149: Configure Vlans
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 7. Select one or more interfaces by taking one of the following actions: • To configure a single interface, select the check box associated with the interface, or type the interface number in the Go To Interface field and click the Go button.
Page 150: Configure Vlan Settings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 151 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. Configure Switching...
Page 152 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 4. Enter one of the following passwords: • After registration, enter the local device password. By default, the local device password is password. •...
Page 153: Configure Vlan Membership
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 154 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 4. Enter one of the following passwords: • After registration, enter the local device password. By default, the local device password is password. •...
Page 155 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 9. In the Ports table, click each port once, twice, or three times to configure one of the following modes or reset the port to the default mode: •...
Page 156: View The Vlan Status
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 157: Configure The Pvid Settings For An Interface
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. Configure Switching...
Page 158 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 4. Enter one of the following passwords: • After registration, enter the local device password. By default, the local device password is password. •...
Page 159 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management VLAN IDs range from 1 to 4093. Use a hyphen (-) to specify a range or a comma (,) to separate VLAN IDs in a list. Spaces and zeros are not permitted. You can specify port tagging for the VLAN only if the port that you want to add as a tagged port is also member of the VLAN.
Page 160: Configure A Mac-Based Vlan
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 161 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 162: Configure Protocol-Based Vlan Groups
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 163: Configure Protocol-Based Vlan Group Membership
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. Configure Switching...
Page 164 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 4. Enter one of the following passwords: • After registration, enter the local device password. By default, the local device password is password. •...
Page 165: Configure A Voice Vlan
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 166 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management This selection specifies the administrative mode for the voice VLAN for the switch. The default is Disable. 8. Select the interface by taking one of the following actions: •...
Page 167: Configure The Garp Switch Settings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 168: Configure Garp Ports
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 169 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 5. Click the Login button. The System Information page displays. 6. Select Switching> VLAN > Advanced > GARP Port Configuration. 7. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table heading: •...
Page 170: Configure Auto-Voip
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 171 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password for the last Insight network location. For information about the credentials, see Credentials for the local browser interface on page 32.
Page 172: Configure The Auto-Voip Oui-Based Properties
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 173: Configure The Oui-Based Port Settings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 174: Manage The Oui Table
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 7. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table heading: • 1 (the unit ID of the switch).
Page 175 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 176: Display The Auto-Voip Status
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 177: Configure Spanning Tree Protocol
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 178: Configure The Stp Settings And View The Stp Status
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. Configure Switching...
Page 179 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 4. Enter one of the following passwords: • After registration, enter the local device password. By default, the local device password is password. •...
Page 180: Configure The Cst Settings
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The following table describes the nonconfigurable fields displayed on the page. Table 33. STP Configuration status Field Description Global Settings Configuration Digest Key The identifier used to identify the configuration currently being used.
Page 181 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 182: Configure The Cst Port Settings
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management less than or equal to (2 * Bridge Forward Delay) – 1 and greater than or equal to 2 * (Bridge Hello Time +1). The default value is 20. •...
Page 183 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 184 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 10. From the Fast Link menu, select whether the specified port is an edge port within the CST. The option is Enable or Disable. The default value is Disable. 11.
Page 185: View The Cst Port Status
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 186 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 7. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table heading: • 1 (the unit ID of the switch).
Page 187: View The Rapid Stp Information
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 188: Manage The Mst Settings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 189 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 6. Select Switching > STP > Advanced > MST Configuration. 7. Configure the MST values: • MST ID. Specify the ID of the MST to create. The range is from 1 to 4094. This is visible only when the select option of the MST ID select box is selected.
Page 190 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 191: Configure And View The Port Settings For An Mst Instance
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 192 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 193 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management • To configure multiple interfaces with the same settings, select the check box associated with each interface. • To configure all interfaces with the same settings, select the check box in the heading row.
Page 194: View The Stp Statistics
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 195 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The System Information page displays. 6. Select Switching > STP > Advanced > STP Statistics. 7. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table heading: •...
Page 196: Configure Multicast
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 197: View The Mfdb Statistics
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 198: Configure The Auto-Video Multicast Settings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 199: Manage Igmp Snooping
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management By default, the local device password is password. • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password for the last Insight network location.
Page 200: Configure Igmp Snooping
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 201: Configure Igmp Snooping For Interfaces
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 7. Select the IGMP Snooping Status Enable or Disable radio button. This selection specifies the administrative mode for IGMP snooping for the switch. The default is Disable.
Page 202 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 203: View, Search, Or Clear The Igmp Snooping Table
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. Configure Switching...
Page 204 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 4. Enter one of the following passwords: • After registration, enter the local device password. By default, the local device password is password. •...
Page 205: Configure Igmp Snooping For Vlans
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 206: Modify Igmp Snooping Settings For A Vlan
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 207: Disable Igmp Snooping On A Vlan
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 208: Configure One Or More Igmp Multicast Router Interfaces
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 209: Configure An Igmp Multicast Router Vlan
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 7. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table heading: • 1 (the unit ID of the switch).
Page 210: Igmp Snooping Querier Overview
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 211: Configure An Igmp Snooping Querier
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 212: Configure An Igmp Snooping Querier For A Vlan
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 213: Display The Status Of The Igmp Snooping Querier For Vlans
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. Configure Switching...
Page 214 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 4. Enter one of the following passwords: • After registration, enter the local device password. By default, the local device password is password. •...
Page 215: Manage Mld Snooping
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 216: Configure Mld Snooping For Interfaces
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The System Information page displays. 6. Select Switching> Multicast > MLD Snooping > Configuration. 7. Select the MLD Snooping Admin Mode Enable radio button. By default, the Disable radio button is selected.
Page 217 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 218: Configure The Mld Vlan Settings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 219: Modify The Mld Snooping Settings For A Vlan
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password for the last Insight network location. For information about the credentials, see Credentials for the local browser interface on page 32.
Page 220: Remove Mld Snooping From A Vlan
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 221: Configure One Or More Mld Multicast Router Interfaces
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 222: Configure An Mld Multicast Router Vlan
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The System Information page displays. 6. Select Switching> Multicast > MLD Snooping > Multicast Router Configuration. 7. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table heading: •...
Page 223 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 224: Configure An Mld Snooping Querier
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 3. Enter one of the following passwords: •...
Page 225: Configure The Mld Snooping Querier Vlan Settings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 226 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 7. In the VLAN ID field, specify the VLAN ID on which the MLD snooping querier is administratively enabled and for which a VLAN exists in the VLAN database. 8.
Page 227: View, Search, And Manage The Mac Address Table
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 228 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 7. Use the Search menu and field to search for a MAC address, VLAN ID, or interface number: • Search by MAC Address. From the Search menu, select MAC Address, and enter the 6-byte hexadecimal MAC address in two-digit groups separated by colons, for example, 01:23:45:67:89:AB.
Page 229: Set The Dynamic Address Aging Interval
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 230: Add A Static Mac Address To The Mac Address Table
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 231: Configure Layer 2 Loop Protection
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 7. From the Interface menu, select the interface. 8. In the Static MAC Address field, enter the static MAC address that you want to add. 9.
Page 232: Configure Global Layer 2 Loop Protection
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 233: View And Configure Layer 2 Loop Protection On A Port
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 234 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 7. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table heading: • 1 (the unit ID of the switch).
Page 235 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The following table describes the nonconfigurable information displayed on the page. Table 49. L2 Loop Protection Interface Information Field Description Loop Detected Shows whether a loop is detected on the interface.
Page 236: Chapter 4 Configure Routing
Configure Routing This chapter contains the following sections: Routing concepts • Configure the routing mode • Configure VLAN routing • Configure router discovery for a VLAN routing interface • Manage routes and view the routing table • Configure Address Resolution Protocol •...
Page 237: Routing Concepts
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Routing concepts The switch supports IP routing. When a packet enters the switch, the switch checks the destination MAC address to determine if it matches any of the configured routing interfaces. If it does, the switch searches the host table for a matching destination IP address.
Page 238 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 239: View The Ip Routing Statistics
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 240 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The following table describes the nonconfigurable information displayed on the page. Table 51. IP Statistics information Field Description IpInReceives The total number of input datagrams received from interfaces, including those received in error.
Page 241 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Table 51. IP Statistics information (continued) Field Description IpInUnknownProtos The number of locally addressed datagrams received successfully but discarded because of an unknown or unsupported protocol. IpInDiscards The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but that were discarded (for lack of...
Page 242 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Table 51. IP Statistics information (continued) Field Description IcmpInTimeExcds The number of ICMP time exceeded messages received. IcmpInParmProbs The number of ICMP parameter problem messages received. IcmpInSrcQuenchs The number of ICMP source quench messages received.
Page 243: Configure Vlan Routing
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Configure VLAN routing You can configure the switch with some ports supporting VLANs and some ports supporting routing. You can also configure the switch to allow traffic on a VLAN to be treated as if the VLAN were a router port.
Page 244 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 245: Manage A Vlan Routing Interface
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 246 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password for the last Insight network location. For information about the credentials, see Credentials for the local browser interface on page 32.
Page 247: Delete A Vlan Routing Interface
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 248: Configure Router Discovery For A Vlan Routing Interface
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 249: Manage Routes And View The Routing Table
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. Configure Routing...
Page 250 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 4. Enter one of the following passwords: • After registration, enter the local device password. By default, the local device password is password. •...
Page 251 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management controls whether a static route is more or less preferred than other static routes to the same destination. 8. In the Description field, enter a description for the route. The description must consist of alphanumeric, hyphen, or underscore characters and can be up to 31 characters in length.
Page 252: Modify A Route
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 253: Delete A Route
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 254: Configure Address Resolution Protocol
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Configure Address Resolution Protocol The Address Resolution Protocol (ARP) associates a Layer 2 MAC address with a Layer 3 IPv4 address. ARP is a part of the Internet Protocol (IP) and is used to translate an IP address to a media (MAC) address, defined by a LAN such as an Ethernet LAN.
Page 255 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 256: Manually Add An Entry To The Arp Table
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 257: View Or Globally Configure The Arp Table
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password for the last Insight network location. For information about the credentials, see Credentials for the local browser interface on page 32.
Page 258 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 259: Remove Arp Entries From The Arp Cache
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 260 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management • Specific Static Entry. Lets you specify the IP address to be removed. 8. If you select Specific Dynamic/Gateway Entry or Specific Static Entry, in the Remove IP Address field, enter the IP address to be removed.
Page 261: Chapter 5 Configure Quality Of Service
Configure Quality of Service This chapter contains the following sections: Quality of Service concepts • Manage the Class of Service • Manage Differentiated Services •...
Page 262: Quality Of Service Concepts
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Quality of Service concepts In a switch, each physical port consists of one or more queues for transmitting packets on the attached network. Multiple queues per port are often provided to give preference to certain packets over others based on user-defined criteria.
Page 263: Configure The Global Cos Settings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 264: Configure The Cos Settings For An Interface
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management By default, the Global radio button is selected. • To configure the same CoS trust mode settings for all CoS configurable interfaces, do the following: a.
Page 265 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 266: Configure The Cos Queue Settings For An Interface
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management • DSCP. The six most significant bits of the DiffServ field are called the Differentiated Services Code Point (DSCP) bits. 10. In the Interface Shaping Rate field, specify the maximum outbound transmission rate bandwidth in kbps.
Page 267 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 268: Map 802.1P Priorities To Queues
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 269: Map Dscp Values To Queues
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 270 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management For information about the credentials, see Credentials for the local browser interface on page 32. 5. Click the Login button. The System Information page displays. 6.
Page 271: Manage Differentiated Services
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Manage Differentiated Services The QoS feature contains Differentiated Services (DiffServ) support that allows traffic to be classified into streams and given certain QoS treatment in accordance with defined per-hop behaviors.
Page 272: Configure The Diffserv Mode And Display The Entries In The Diffserv Private Mib Tables
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 273: Configure A Diffserv Class
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 7. Select the administrative mode for DiffServ: • Enable. Differentiated services are active. This is the default setting. • Disable. The DiffServ configuration is retained and can be changed but is not active. 8.
Page 274 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 275 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 10. Define the criteria that must be associated the DiffServ class by selecting one of the following radio buttons: • Match Every. Select this radio button to add a match condition that considers all packets to belong to the class.
Page 276 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management • Source MAC. Select this radio button to require a packet’s source MAC address to match the specified MAC address. After you select this radio button, use the following fields to configure the source MAC address match criteria: Address.
Page 277 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management • Destination L4 Port. Select this radio button to require a packet’s TCP/UDP destination port to match the specified protocol. You can also select Other from the menu and enter a port number from 0 to 65535.
Page 278 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 279 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 280: Configure Diffserv Ipv6 Class Settings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 281 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 6. Select QoS > DiffServ > Advanced > IPv6 Class Configuration. 7. Enter a class name in the Class Name field. The Class Name field also lists all the existing IPv6 class names, from which one can be selected for modification or deletion.
Page 282 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 11. Define the criteria that must be associated the IPv6 DiffServ class: • Match Every. Select this radio button to add a match condition that considers all packets to belong to the class.
Page 283 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 284 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 285: Configure A Diffserv Policy
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 286 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management For information about the credentials, see Credentials for the local browser interface on page 32. 5. Click the Login button. The System Information page displays. 6.
Page 287 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 11. Configure the policy attributes by selecting one of the following radio buttons: • Assign Queue. Select this radio button to specify that traffic must be assigned to a queue, which you must select from the menu.
Page 288 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 289 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 290 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 291: Configure The Diffserv Service Interface
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 292 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password for the last Insight network location. For information about the credentials, see Credentials for the local browser interface on page 32.
Page 293 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 294 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 295: View Diffserv Service Statistics
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 296 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 7. Click the Update button to refresh the page with the latest information about the switch. The following table describes the information available on the Service Statistics page. Table 59.
Page 297: Chapter 6 Manage Device Security
Manage Device Security This chapter contains the following sections: Change the local device password for the local browser interface • Manage the RADIUS settings • Configure the TACACS+ settings • Configure authentication lists • Manage the Smart Control Center Utility •...
Page 298: Change The Local Device Password For The Local Browser Interface
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 299: Manage The Radius Settings
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 10. Click the Apply button. Your settings are saved. Manage the RADIUS settings RADIUS servers provide additional security for networks. The RADIUS server maintains a user database, which contains per-user authentication information.
Page 300 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 301: Configure A Radius Authentication Server On The Switch
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 302 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management For information about the credentials, see Credentials for the local browser interface on page 32. 5. Click the Login button. The System Information page displays. 6.
Page 303 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The following table describes the RADIUS server statistics displayed on the page. Table 61. RADIUS authentication server statistics information Field Description Server Address The address of the RADIUS server or the name of the RADIUS server for which the statistics are displayed.
Page 304 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 305: Configure A Radius Accounting Server
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. Manage Device Security...
Page 306 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 4. Enter one of the following passwords: • After registration, enter the local device password. By default, the local device password is password. •...
Page 307 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The following table describes the RADIUS server statistics displayed on the page. Table 62. RADIUS accounting server statistics information Field Description Accounting Server Address The accounting server associated with the statistics.
Page 308 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 309: Configure The Tacacs+ Settings
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management For information about the credentials, see Credentials for the local browser interface on page 32. 5. Click the Login button. The System Information page displays. 6.
Page 310: Configure A Tacacs+ Server On The Switch
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 311 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 312: Modify The Settings For A Tacacs+ Server On The Switch
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 313: Configure Authentication Lists
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 314 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 315: Configure An Https Authentication List
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 316 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 7. Select the check box next to the httpsList name. 8. From the menu in the 1 column, select the authentication method that must be used first in the selected authentication login list.
Page 317: Configure The Dot1X Authentication List
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 318: Manage The Smart Control Center Utility
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 319: Configure Management Access
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 320: Configure Https Access Settings
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 6. Select Security > Access > HTTP > HTTP Configuration. 7. In the HTTP Session Soft Timeout field, specify the number of minutes an HTTP session can be idle before a time-out occurs.
Page 321 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 322: Manage Certificates For Https Access
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 323 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. Manage Device Security...
Page 324 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 4. Enter one of the following passwords: • After registration, enter the local device password. By default, the local device password is password. •...
Page 325 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 326: Control Access With Profiles And Rules
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 8. From the Server Address Type menu, select IPv4 or DNS to indicate the format for the TFTP Server IP field. The default is IPv4. 9.
Page 327: Add An Access Profile
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 328: Add A Rule To The Access Profile
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 329: Activate The Access Profile
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 5. Click the Login button. The System Information page displays. 6. Select Security > Access > Access Control > Access Rule Configuration. 7.
Page 330: Display The Access Profile Summary And The Number Of
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 331 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 332: Deactivate An Access Profile
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 333: Remove An Access Profile
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 334: Configure Port Authentication
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 335 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 5. Click the Login button. The System Information page displays. 6. Select Security > Port Authentication > Basic > 802.1X Configuration. 7. Configure the following port authentication settings: •...
Page 336: Manage Port Authentication On Individual Ports
The System Information page displays. 6. Select Security > Port Authentication > Advanced > Port Authentication. The previous figure shows only part of the page for models GS108Tv3 and GS110TPv3. Model GS110TPP also supports MAC-based Authentication Bypass (MAB) and includes a MAB column to the right of the Port Control column.
Page 337 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 8. Select one or more interfaces by taking one of the following actions: • To configure a single interface, select the check box associated with the port, or type the port number in the Go To Interface field and click the Go button.
Page 338 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management • Quiet Period. Specify the time in seconds that the port remains in the quiet state following a failed authentication exchange. While in the quite state, the port does not attempt to acquire a supplicant.
Page 339 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 340 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 341: View The Port Summary
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 342: View The Client Summary
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The following table describes the fields on the Port Summary page. Table 65. Port summary Field Description Port The port whose settings are displayed in the current table row. Control Mode This field indicates the configured control mode for the port.
Page 343 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 344: Set Up Traffic Control
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 345 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The previous figure shows the MAC Filter Configuration page for model GS110TPv3. 7. From the MAC Filter menu, select Create Filter. If you did not configure any filters, this is the only option available. 8.
Page 346 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 347 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 348: Configure Storm Control Settings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 349 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 7. In the Storm Control section, from the Ingress Control Mode menu, select one of the following modes for storm control: • Disabled.
Page 350 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 351 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The default settings in the Port Settings section depends on the global storm control settings (see Configure global storm control settings on page 348), which apply to all ports.
Page 352: Manage Port Security
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 353 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. Manage Device Security...
Page 354 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 4. Enter one of the following passwords: • After registration, enter the local device password. By default, the local device password is password. •...
Page 355 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 356: Configure Protected Ports
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 6. Select Security > Traffic Control > Port Security > Security MAC Address. 7. From the Port List menu, select the individual interface. Port security must be enabled on the selected interface.
Page 357: Configure Access Control Lists
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 358: Use The Acl Wizard To Create A Simple Acl
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 359 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management For information about the credentials, see Credentials for the local browser interface on page 32. 5. Click the Login button. The System Information page displays. 6.
Page 360 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management • ACL Based on Source IPv4 L4 Port. Creates an ACL based on the source IPv4 Layer 4 port number. • ACL Based on Destination IPv6 L4 Port. Creates an ACL based on the destination IPv6 Layer 4 port number.
Page 361 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management ACL Based On Fields Destination IPv6 • Destination Prefix. Specify the destination prefix. • Destination Prefix Length. Specify the destination prefix length. Source IPv6 •...
Page 362 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 363 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 364: Configure A Mac Acl
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The previous figure shows a sample for model GS110TPv3. For information about the ACL Wizard, see Use the ACL Wizard to create a simple ACL on page 358.
Page 365 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 366 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 367: Configure Mac Acl Rules
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 368 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 369 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 13. From the Match Every menu, select whether each Layer 2 MAC packet must be matched against the rule: • True. Each packet must match the selected ACL rule. •...
Page 370 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 371 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 372: Configure Mac Bindings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 373 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The previous figure shows the MAC Binding Configuration page for model GS110TPv3. 7. From the ACL ID menu, select an ACL. The fixed selection from the Direction menu is Inbound, which means that MAC ACL rules are applied to traffic entering the interface.
Page 374: View Or Delete Mac Acl Bindings In The Mac Binding Table
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 375: Configure A Basic Or Extended Ipv4 Acl
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The following table describes the information that is displayed in the MAC binding table. Table 70. MAC Binding Table Field Description Interface The interface of the ACL assigned.
Page 376 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 377 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 378 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 379: Configure Rules For A Basic Ipv4 Acl
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 380 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management If no rules exist, the Basic ACL Rule Table might show the message No rules were configured for this ACL. If one or more rules exist for the ACL, the rules display in the Basic ACL Rule Table.
Page 381 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 382 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 383: Configure Rules For An Extended Ipv4 Acl
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 384 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 6. Select Security > ACL > Advanced > IP Extended Rules. The previous figure does not show all columns on the page. If no rules exists, the Extended ACL Rule Table might show the message No rules were configured for this ACL.
Page 385 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Deny. Drop packets that meet the ACL criteria. Logging. If the selection form the Action menu is Deny, you can enable logging for the ACL by selecting the Enable radio button.
Page 386 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Each of these values translates into its equivalent port number, which is used as both the start and end of the port range. Select Other from the menu to enter a port number.
Page 387 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Port. If you select the Port radio button, you can either enter the port number yourself or select one of the following protocols from the menu. •...
Page 388 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management • If you specify information in the Type field, the IP ACL rule matches the specified ICMP message type. The type number can be from 0 to 255. •...
Page 389 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 390: Configure An Ipv6 Acl
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 391 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 392 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. Manage Device Security...
Page 393 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 394: Configure Rules For An Ipv6 Acl
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 395 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The previous figure does not show all columns on the page. If no rules exists, the IPv6 ACL Rule Table might show the message No rules were configured for this ACL.
Page 396 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management • Logging. If you select the Deny radio button, you can enable logging for the ACL by selecting the Enable radio button. (Logging is subject to resource availability in the device.) If the access list trap flag is also enabled, periodic traps are generated, indicating the number of times this rule was evoked during the report interval.
Page 397 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management • The source IP UDP port protocols are domain, echo, snmp, ntp, rip, time, who, and tftp. Each of these values translates into its equivalent port number, which is used as both the start and end of the port range.
Page 398 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management • The destination IP TCP port protocols are domain, echo, ftp, ftpdata, www-http, smtp, telnet, pop2, pop3, and bgp. • The destination IP UDP port protocols are domain, echo, snmp, ntp, rip, time, who, and tftp.
Page 399 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 400 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 401: Configure Ip Acl Interface Bindings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 402 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The previous figure shows the IP Binding Configuration page for model GS110TPv3. 7. From the ACL ID menu, select the existing IP ACL for you which you want to add an IP ACL interface binding.
Page 403: View Or Delete Ip Acl Bindings In The Ip Acl Binding Table
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 404: Configure Vlan Acl Bindings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. Manage Device Security...
Page 405 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 4. Enter one of the following passwords: • After registration, enter the local device password. By default, the local device password is password. •...
Page 406 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 407: Chapter 7 Monitor The Switch And The Traffic
Monitor the Switch and the Traffic This chapter contains the following sections: Monitor the switch and the ports • Configure and view the logs • Configure port mirroring •...
Page 408: Monitor The Switch And The Ports
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 409 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 7. Click the Update button to refresh the page with the latest information about the switch. 8. To clear all the statistics counters, click the Clear button. Clearing resets all switch summary and detailed statistics to default values.
Page 410 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Table 74. Switch statistics (continued) Field Description Receive Packets Discarded The number of inbound packets that were chosen to be discarded, even though no errors were detected, in order to prevent their being delivered to a higher-layer protocol.
Page 411: View Port Statistics
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 412 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. Monitor the Switch and the Traffic...
Page 413 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 414: View And Manage Detailed Port Statistics
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 415 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 5. Click the Login button. The System Information page displays. 6. Select Monitoring > Ports > Port Detailed Statistics. The previous figure does not show all fields on the Port Detailed Statistics page. 7.
Page 416 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Table 76. Detailed port statistics (continued) Field Description Port Channel ID If the port is a member of a port channel (LAG), the port channel’s interface ID and name are shown.
Page 417 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Table 76. Detailed port statistics (continued) Field Description Packets RX and TX 256-511 The total number of packets (including bad packets) received or transmitted that Octets were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
Page 418 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Table 76. Detailed port statistics (continued) Field Description Broadcast Packets Received The total number of good packets received that were directed to the broadcast address.
Page 419 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Table 76. Detailed port statistics (continued) Field Description Packets Transmitted 128-255 The total number of packets (including bad packets) received that were between Octets 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
Page 420: View Or Clear Eap And Eapol Statistics
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. Monitor the Switch and the Traffic...
Page 421 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 4. Enter one of the following passwords: • After registration, enter the local device password. By default, the local device password is password. •...
Page 422: Perform A Cable Test
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 423 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management By default, the local device password is password. • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password for the last Insight network location.
Page 424: Configure And View The Logs
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The following table describes the nonconfigurable information displayed on the page. Table 78. Cable Test information Field Description Cable Status Indicates the cable status: •...
Page 425 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 426: Manage And View The Flash Log
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. Monitor the Switch and the Traffic...
Page 427 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 4. Enter one of the following passwords: • After registration, enter the local device password. By default, the local device password is password. •...
Page 428: Manage The Server Log
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 429 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management For information about the credentials, see Credentials for the local browser interface on page 32. 5. Click the Login button. The System Information page displays. 6.
Page 430 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 431: View Or Clear The Trap Logs And The Counters
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 432 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 433: Configure Port Mirroring
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management The following table describes the Trap Log information that is displayed on the page. Table 79. Trap Logs information Field Description Number of Traps Since Last The number of traps that occurred since the switch last rebooted.
Page 434 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 435 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 10. Select whether to display physical interfaces, LAGs, the CPU, or al by clicking one of the following links above the table heading: •...
Page 436: Chapter 8 Maintain Or Troubleshoot The Switch
Maintain or Troubleshoot the Switch This chapter contains the following sections: Reboot the switch • Reset the switch to its factory default settings • Export a file from the switch • Download a file to the switch or update the software •...
Page 437: Reboot The Switch
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 438: Reset The Switch To Its Factory Default Settings
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 439: Export A File From The Switch
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 440 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management For information about the credentials, see Credentials for the local browser interface on page 32. 5. Click the Login button. The System Information page displays. 6.
Page 441: Use Http To Export A File From The Switch To A Computer
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 442: Download A File To The Switch Or Update The Software
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management offline to personalize it for another similar device (for example, change the device name or IP address), and download it to that device. •...
Page 443 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 444 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management • Text Configuration. A text-based configuration file enables you to edit a configured text file (startup-config) offline as needed. The most common usage of text-based configuration is to upload a working configuration from a device, edit it offline to personalize it for another similar device (for example, change the device name or IP address), and download it to that device.
Page 445: Use Http To Download A File To The Switch Or Update The Software Image
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 446 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 7. From the File Type menu, select the type of file: • Software. The system software image, which is saved in one of two flash sectors called images (image1 and image2).
Page 447: Manage Software Images
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Note: After you download a text configuration file, the switch applies the configuration automatically. 11. After you download a software image file, if you want the switch to run the software image, do the following: a.
Page 448: Configure Dual Image Settings
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 449 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 450 Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 451: View The Dual Image Status
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 452: Perform Diagnostics And Troubleshooting
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 453 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management For information about the credentials, see Credentials for the local browser interface on page 32. 5. Click the Login button. The System Information page displays. 6.
Page 454: Ping An Ipv6 Address
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 455 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management For information about the credentials, see Credentials for the local browser interface on page 32. 5. Click the Login button. The System Information page displays. 6.
Page 456: Send An Ipv4 Traceroute
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. 4. Enter one of the following passwords: •...
Page 457 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 5. Click the Login button. The System Information page displays. 6. Select Maintenance > Troubleshooting > Traceroute IPv4. 7. In the IP Address/Hostname field, enter the IP address or host name of the device for which the path must be discovered.
Page 458: Send An Ipv6 Traceroute
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. Maintain or Troubleshoot the Switch...
Page 459 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 4. Enter one of the following passwords: • After registration, enter the local device password. By default, the local device password is password. •...
Page 460: Enable Remote Diagnostics
Internet on page 19 or Access the switch off-network on page 30. The login page displays. If the NETGEAR Business page displays, see Register and access the switch with your NETGEAR account on page 34. Maintain or Troubleshoot the Switch...
Page 461 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 4. Enter one of the following passwords: • After registration, enter the local device password. By default, the local device password is password. •...
Page 462: Appendix A Configuration Examples
Configuration Examples This appendix contains the following sections: Virtual Local Area Networks (VLANs) • Access control lists (ACLs) • Differentiated Services (DiffServ) • 802.1X access control • Multiple Spanning Tree Protocol • VLAN routing interfaces •...
Page 463: Virtual Local Area Networks (Vlans)
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Virtual Local Area Networks (VLANs) A local area network (LAN) can generally be defined as a broadcast domain. Hubs, bridges, or switches in the same physical segment or segments connect all end node devices. End nodes can communicate with each other without the need for a router.
Page 464: Vlan Configuration Examples
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management • If the port is a member of the VLAN specified by the packet’s VLAN ID, the packet can be sent to other ports with the same VLAN ID. •...
Page 465: Access Control Lists (Acls)
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management • If an untagged packet enters port 4, the switch tags it with VLAN ID 20. The packet can access port 5 and port 6. The outgoing packet is stripped of its tag to become an untagged packet as it leaves port 6.
Page 466: Basic Ipv4 Acl Example Configuration
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management • Assign Queue ID. 0 • Match Every. False • CoS. 0 • Destination MAC. 01:02:1A:BC:DE:EF • Destination MAC Mask. 00:00:00:00:FF:FF • EtherType.
Page 467: Differentiated Services (Diffserv)
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management • Source IP Address. 192.168.187.0 • Source IP Mask. 255.255.0 For additional information about IP ACL rules, see Configure rules for a basic IPv4 ACL on page 379.
Page 468: Class
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Two basic types of QoS are supported: • Integrated Services. Network resources are apportioned based on request and are reserved (resource reservation) according to network management policy (RSVP, for example).
Page 469: Diffserv Traffic Classes
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management DiffServ traffic classes With DiffServ, you define which traffic classes to track on an ingress interface. You can define simple BA classifiers (DSCP) and a wide variety of multifield (MF) classifiers: •...
Page 470: Diffserv Example Configuration
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management definition to convey some QoS characteristics to downstream switches that do not routinely look at the DSCP value in the IP header. •...
Page 471: 802.1X Access Control
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 6. Click the Add button. The policy is added. 7. Click the Policy1 hyperlink to view the Policy Class Configuration page for this policy. 8.
Page 472 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management between the authenticator (the system that passes an authentication request to the authentication server) and the supplicant (the system that requests authentication), as well as between the authenticator and the authentication server.
Page 473: 802.1X Example Configuration
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Figure 3. 802.1X authentication roles 802.1X example configuration This example shows how to configure the switch so that 802.1X-based authentication is required on the ports in a corporate conference room (1/0/5–1/0/8). These ports are available to visitors and must be authenticated before access is granted to the network.
Page 474: Multiple Spanning Tree Protocol
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management 6. On the RADIUS Server Configuration page, configure a RADIUS server with the following settings: • Server Address. 192.168.10.23 • Secret Configured. Yes •...
Page 475 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management interconnecting these regions, and an Internal Spanning Tree (IST) within each region. MSTP ensures that frames with a VLAN ID are assigned to one and only one of the MSTIs or the IST within the region, that the assignment is consistent among all the networking devices in the region, and that the stable connectivity of each MSTI and IST at the boundary of the region matches that of the CST.
Page 476: Mstp Example Configuration
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management MSTP example configuration This example shows how to create an MSTP instance from the switch. The example network includes three different switches that serve different locations in the network. In this example, ports 1/0/1–1/0/5 are connected to host stations, so those links are not subject to network loops.
Page 477: Vlan Routing Interfaces
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management If you do not specify a root bridge and all switches are assigned the same bridge priority value, the switch with the lowest MAC address is elected as the root bridge (see Configure the CST settings on page 180).
Page 478 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management When a port is enabled for bridging (the default) rather than routing, all normal bridge processing is performed for an inbound packet, which is then associated with a VLAN. Its MAC destination address (MAC DA) and VLAN ID are used to search the MAC address table.
Page 479 Specifications and Default Settings This appendix contains the following sections: Switch default settings • General feature default settings • System setup and maintenance settings • Port characteristics • Traffic control settings • Quality of Service settings • Security settings • System management settings •...
Page 480: Appendix B Specifications And Default Settings
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Switch default settings The following table describes the switch default settings. Table 81. Switch default settings Feature Default IP address 192.168.0.239 Subnet mask 255.255.255.0 Default gateway 192.168.0.254...
Page 481: General Feature Default Settings
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Table 81. Switch default settings (continued) Feature Default Broadcast storm control Disabled MAC table address aging 300 seconds (dynamic addresses) Default VLAN IDs and names 1.
Page 482 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Table 82. General feature default settings (continued) Feature Name/Setting Default PVID Acceptable frame types Admit All Ingress filtering Disabled Port priority GARP Join Timer 20 (centiseconds) Leave Timer...
Page 483 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Table 82. General feature default settings (continued) Feature Name/Setting Default Server time-out STP/RSTP/MSTP, Global Spanning tree state Enabled STP operation mode IEEE 802.1s RSTP Configuration name MAC address Configuration revision level...
Page 484 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Table 82. General feature default settings (continued) Feature Name/Setting Default LAG type Static Local Link Discovery Protocol (LLDP), Global TLV advertised interval Hold multiplier Reinitializing delay Transmit delay...
Page 485 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Table 82. General feature default settings (continued) Feature Name/Setting Default Advertise address 224.0.0.1 and 255.255.255.255 Maximum advertise interval Minimum advertise interval Advertise lifetime 1800 Preference level ARP/ARP Aging...
Page 486 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Table 82. General feature default settings (continued) Feature Name/Setting Default 802.1p to queue mapping (802.1p -> queue) Assured forwarding: (continued) (AF 11) 001010 -> 0 (AF 12) 001100 ->...
Page 487 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Table 82. General feature default settings (continued) Feature Name/Setting Default DSCP to queue mapping (DSCP -> queue) (49) 110001 -> 3 (continued) (50) 110010 ->...
Page 488: System Setup And Maintenance Settings
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Table 82. General feature default settings (continued) Feature Name/Setting Default L2 Loop Protection Admin mode Disabled System setup and maintenance settings The following table describes the system setup and maintenance settings. Table 83.
Page 489: Traffic Control Settings
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Table 84. Port characteristics (continued) Feature Sets Supported Default Port trunking (aggregation) Preconfigured 802.1D spanning tree Disabled 802.1w RSTP Enabled 802.1s spanning tree 8 instances Disabled Static 802.1Q tagging...
Page 490: Security Settings
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Security settings The following table describes the security settings. Table 87. Security settings Feature Sets Supported Default 802.1X All ports Disabled MAC ACLs 100 (shared with IPv4 and IPv6 All MAC addresses allowed ACLs)
Page 491: Settings For Other Features
Number of supported routed VLANs Number of supported ARP entries Hardware technical specifications The following table describes the hardware technical specifications. Table 90. Hardware technical specifications Feature Model GS108Tv3 Model GS110TPv3 Model GS110TPP Network interfaces Eight 10/100/1000BASE-T Eight 10/100/1000BASE-T Eight 10/100/1000BASE-T...
Page 492 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Table 90. Hardware technical specifications (continued) Feature Model GS108Tv3 Model GS110TPv3 Model GS110TPP Switch PoE+ power 120W (upgradable to budget 190W) Dimensions 6.2 x 4.0 x 1.1 in.

This manual is also suitable for:

Gs110tpv3 Gs110tpp

NETGEAR GS108Tv3 User Manual

Chapter 1 Get Started

Chapter 2 Configure System Information

Chapter 3 Configure Switching

Chapter 4 Configure Routing

Chapter 5 Configure Quality of Service

Chapter 6 Manage Device Security

Chapter 7 Monitor the Switch and the Traffic

Chapter 8 Maintain or Troubleshoot the Switch

Appendix A Configuration Examples

Quick Links

Related Manuals for NETGEAR GS108Tv3

Summary of Contents for NETGEAR GS108Tv3