Riso ComColor Series User Manual page 65

●
1 Loading Originals
For information on the types of originals that can be
loaded, see "Originals" in the "Safety Information".
■ In the ADF
1
Load the original in the ADF.
Align the originals and place them face up.
2
Slide the original guides to match
the width of the originals.
■ On the Platen Glass
Open the original cover and place the original on
the glass surface.
1
Open the original cover.
2
Place the original.
Place the original face down on the glass. Align
the corner of the original with the upper-left corner
of the glass.
Overview of Copy Operations
3
Close the original cover.
Open and close the original cover gently.
●
2 Selecting Copy Mode
1
Press [Copy] on the mode screen.
The copy mode screen is displayed.
● Press the MODE key to display the mode
screen.
● You may have to login before the copy mode
screen is displayed. (p. 13 "Logging In")
● Buttons for modes that the current user is not
authorized to use are grayed out.
● When using an optional IC card reader, you
can login by holding the IC card over the card
reader.
● The displayed mode buttons vary depending
on the optional equipment connected.
ComColor Series User's Guide 01
2
2-3