Riso ComColor Series User Manual page 82

2 Copy
●
Saving Settings
1
Use the copy mode screen to
configure the copy functions you
want to save or retrieve.
2
Press [Functions] on the copy
mode screen.
3
Press [Save/Call setting].
The [Save/Call setting] screen is displayed.
• [No Entry] is displayed for buttons that do not
have registered settings.
4
Press [No Entry].
The [Setting entry] screen is displayed.
2-20
5
Confirm the setting.
The current settings are displayed on the [Setting
entry] screen.
To add a name to a button, go to Step 3 in
"Renaming the Settings".
When login is necessary, users with
administrative authority can register settings
shared by all users. During this step, press
[Setting is shared by all users].
6
Press [Register].
The copy mode settings set in Step 1 are registered.
• The registration name is displayed as "M" with
a registration number ([M-1] to [M-9] and [M-
0]).
7
Press [Close].
The previous screen is displayed.
●
Retrieving Settings
1
Press [Save/Call setting].
Follow Steps 2 and 3 in "Saving Settings".
2
Press the button of the setting to
retrieve.
The [Setting call] screen is displayed.
Confirm the setting.
3
Press [Retrieve].
The setting is retrieved and the copy mode screen
is displayed.
ComColor Series User's Guide 01