List Of Settings - Riso ComColor Series User Manual

3 Scanner

List of Settings

The following is a list of scanner mode settings.
● The buttons displayed on the screen vary depending on the selected item and how the administrator has
configured the settings.
● An option setting is displayed only when optional equipment required for that setting has been connected.
[Basic]
[Functions]
3-8
Setting
File format
Reproduction size
Image size
Color mode
Scanning level
Duplex/Simplex
Check setting
Save/Call setting
Original
Book shadow erase
Scanning size
Mixed size original
Gamma control
Image control
Base color level
PIN code
Front doors release
Description
Specify the file format, compression level and
resolution for saving the scanned data.
Enlarge or reduce the scanned data.
Specify the page size for saving scanned data.
Specify the color mode of the data to be scanned.
Adjust the scanning density for originals.
Specify sides of the original to be scanned.
Confirm and register the current settings, and print the
settings information.
Up to 10 frequently used settings can be registered.
Select the original type to perform the appropriate
image processing and save the scanned data.
Remove shadows that appear in the center of copies
when an open book is copied.
Specify the scanning size for originals to be scanned.
Specify this when the original has multiple sizes.
Adjust the color balance (CMYK) of originals.
Specify the image processing appropriate for the
original.
Make the background color (base color) lighter so that
the text is easier to read.
Assign PIN codes when saving scanned jobs on the
internal hard disk.
Release the front door lock.
See
p. 3-9
p. 3-10
p. 3-10
p. 3-11
p. 3-12
p. 3-12
p. 3-13
p. 3-13
p. 3-13
p. 3-14
p. 3-14
p. 3-14
p. 3-14
p. 3-14
p. 3-14
p. 3-15
p. 3-15
ComColor Series User's Guide 01