Riso ComColor Series User Manual page 51

●
Staple
Select the stapling method.
● When you select [Left] or [Right] for the binding
side, select from the following options.
[OFF], [1 pos.], [2 pos.]
● When you select [Upper] for the binding side, select
from the following options.
[OFF], [Left 1], [Right 1], [2 pos.]
Upper, Left 1
Upper, 2 pos.
Left, 1 pos.
Left, 2 pos.
<Types of paper that can be stapled>
• Size and orientation of paper that can be stapled
A3, B4, A4, A4-R, B5-R, Ledger, Legal, Letter,
Letter-R, Foolscap and custom size*
The administrator must register the paper size in
*
advance. Ask your administrator.
203 mm - 297 mm
(8"- 11 11/16")
182 mm - 432 mm
(7 3/16" - 17")
• Paper weight: 52 g/m
43-lb bond)
When the paper weight exceeds 162 g/m
bond), only one sheet can be stapled for the
cover.
Upper, Right 1
Right, 1 pos.
Right, 2 pos.
Binding side
Paper feed and
output direction
2 2
- 162 g/m (14-lb bond -
2
(43-lb
<Number of sheets that can be stapled>
• When using standard size paper
A4 or A4-R: 2 to 100 sheets*
Other standard size paper: 2 to 65 sheets*
• When using non-standard size paper
Paper width of 215 mm (8 7/16") or less: 2 to 100
sheets*
Paper width of 216 mm (8 1/2") or greater: 2 to
65 sheets*
215 mm (8 7/16")
When using plain paper and recycled paper
*
2
(85 g/m (23- lb bond))
● An optional multifunction finisher is required to
use this setting.
● When you have configured "Staple", be sure to
configure [Binding side].
● You cannot use "Staple" and "Booklet binding"
at the same time. (p. 1-18 "Booklet binding")
When printing jobs that exceed the maximum
number of sheets that can be stapled, the sheets
are outputted to the stacking tray without being
stapled.
ComColor Series User's Guide 01
Basic Settings
1
Paper feed and
output direction
1-21