Riso ComColor Series User Manual page 40

1 Printer Driver
●
Paper type
Select the type of printing paper.
During printing, the ink amount is adjusted and
image processing is performed to match the
selected paper type.
[Any]
Set the paper type of the corresponding tray or the
[Default paper type of "Any"] setting on the
[Environment] tab.
[Plain]
[IJ paper], [Matt coated]
Select one of these when using IJ paper or similar
paper.
[High-quality]
[Card-IJ]
This printer selects the optimal color profile
according to the paper type. To print with the
appropriate color balance, match the printer paper
settings with the loaded paper.
Color Profile
Colors on a monitor or other display are expressed in
terms of the three primary colors of light (RGB: red,
green, and blue), however colors printed with ink are
expressed in terms of the three primary colors (CMY:
cyan, magenta, and yellow).
Because CMY, which is used to express the colors
printed on paper, has fewer colors than RGB, which is
used to express colors displayed on a computer monitor,
the printer cannot print the colors exactly as seen on the
monitor. For this reason, it is necessary to use a special
method to convert RGB colors to CMY colors so as to
reproduce nearly the same colors or natural colors.
This method is called "color management", and the
conversion table is called a "color profile".
With color management, the printer automatically
selects several types of color profiles to obtain the
optimal color according to the combination of the
original image and paper being used.
• This printer uses created and edited color profiles
based on Color Tune
Monotype Imaging K.K.
1-10
®
technology licensed from
●
Output and Destination
Specify whether to print the data sent from a
computer or save it to a folder on the printer.
[Print]
Print the data.
[Print & Save to folder]
Print the original data and saves it in a folder.
[Save to folder]
Save the original data in a folder.
Depending on the administrator setting, the folder
functions may not be usable.
● Data saved in folders can be printed from the
[Folder] Screen in printer mode (p. 4-9) or the
[Folder] Screen of the RISO Console (p. 5-11).
● The computer user name is added as the
[owner] to the data saved to a folder.
■ Selecting the Destination Folder
The folders registered with [Register folder] on the
[Environment] tab are displayed in [Destination].
(p. 1-28 "[Environment] Tab")
1
In [Output], select either [Print &
Save to folder] or [Save to folder].
2
Click [Details].
The [Output] dialog box is displayed.
3
In the [Destination] pull-down
menu, select the directory of the
original data.
• The available folders are displayed in the
[Destination] list.
• You can enter up to 128 characters for comments
to the printer users in the [Job comment] field.
• You can display job comments using the touch
panel of the printer or the RISO Console.
ComColor Series User's Guide 01