Riso ComColor Series User Manual page 100

2 Copy
4
Press [Register] on the [Program
list] screen.
The [Registration name] screen is displayed.
5
Enter the registration name of the
program.
• Enter a name up to 10 characters long. (p. 15
"Entering Text")
6
Press [OK].
The program is saved and the [Program list]
screen is displayed.
• To only save the program, press [Close], and
then press [Cancel] on the [Program (1)]
screen.
• To copy, press [Close] and then press [Next] on
the [Program (1)] screen.
2-38
●
Retrieving a Program
Retrieve a saved program.
1
Display the [Program (1)] screen.
Follow Steps 1 and 2 in "Configuring the
Program".
2
Press [Save/Call].
The [Program list] screen is displayed.
3
Select the program to retrieve.
• Select one program.
4
Press [Retrieve].
The [Program (1)] screen for the selected settings
is displayed.
5
Press [Next].
The [Program (2)] screen is displayed.
6
Configure the [Collate], [Slip sheet],
and [Offset output] settings.
You cannot use this function with "Collate/slip
sheet" on the [Functions] screen.
7
Press [OK].
The settings are confirmed and the copy mode
screen is displayed.
• To return to the [Program (1)] screen, press
[Back].
ComColor Series User's Guide 01