Riso ComColor Series User Manual page 26

4
Load the paper.
When using paper with different characteristics on
the front and back sides, load the printing side
face-down. Do not load too many sheets.
When loading the paper, be careful not to let its
edge contact the paper guides to prevent it from
being bent.
5
Move the guides against the edges
of the paper, and push the lever to
lock.
24
6
Move the stopper against the edge
of the paper.
Be sure to move the stopper against the edge of
the paper. The machine determines the size of the
paper based on the stopper position.
7
Push the tray back into the
machine.
8
On the operation panel, check the
tray settings.
When you have switched to a different type or size
of paper, update the feed tray settings (p. 2-9
"Feed tray").
ComColor Series User's Guide 01