Riso ComColor Series User Manual page 16

●
How to Log In
When using an optional IC card reader, you can log
in by holding the IC card over the card reader.
1
Press [Login].
2
On the [Login] screen, select your
name.
To find your name, press [ ] or [ ] at right to
scroll through names, or press the index buttons
on the bottom of the screen to display their
corresponding names.
After you select your name, the [Password input]
screen is displayed.
3
Enter the password and press [OK].
The screen for the mode you have logged in is
displayed.
After finishing operations, be sure to press [Logout].
Ask your administrator if you cannot find your
name, or if you have forgotten the password.
14
●
Changing Login Passwords
1
Once you are logged in, press
[Status] on the mode screen.
2
On the [User] screen, press
[Password change].
3
Enter the new password and press
[Next].
4
On the [Password change (input
again)] screen, enter the new
password again and press [OK].
ComColor Series User's Guide 01