Riso ComColor Series User Manual page 66

2 Copy
●
3 Configuring the Functions
Specify the copy finishing settings.
For information on the functions that can be
configured, see "List of Settings" (p. 2-6).
a Status bar
Displays the login or logout button, user name,
machine status (Printer Status Button), and
remaining ink indicator.
b Message area
Displays the job name, number of copies, and any
messages.
c Screen selection buttons
Displays the [Basic], [Selections], or [Functions]
screen when touched.
Use the [Basic] screen to configure the basic copy
settings.
The [Selections] screen displays the frequently
used functions.
Use the [Functions] screen to configure the copy
functions.
d Function configuration buttons
Display the current settings. Press a button to display
the screen for configuring that function.
e Direct access area
Displays the frequently used function buttons.
●
4 Specify the Number of Copies
You can specify up to 9,999 copies using the
numeric keys.
The specified number of copies is displayed at the
top right of the screen.
• To clear the fields, press the [Clear] key.
2-4
●
5 Press the [START] Key
The [Copying in progress] screen is displayed,
and copying of the original starts.
The current status, including the number of copied
pages, is displayed on the screen.
a
b
c
d
e
• When pressing the [START] key while printing
another job, the message "Processing a job.
Printing starts automatically." is displayed.
Copying starts as processing is completed.
• When copying has been completed, the copy
mode screen is displayed.
Pressing the [Interrupt] key pauses printing of the
current job and enables you to perform another
copy.
■ When using the platen glass to scan
an original with several pages
After scanning a sheet of an original, the
confirmation screen is displayed. When there is
another page of the original to scan, load the next
page and press [Scan].
After all originals are scanned, press [Print].
ComColor Series User's Guide 01