Riso ComColor Series User Manual page 22

●
Scanner Mode
[Basic]
[Functions]
20
Setting
File format
Reproduction size
Image size
Color mode
Scanning level
Duplex/Simplex
Check setting
Save/Call setting
Original
Book shadow erase
Scanning size
Mixed size original
Gamma control
Image control
Base color level
PIN code
Front doors release
Description
Specify the file format, compression level and resolution
for saving the scanned data.
Enlarge or reduce the scanned data.
Specify the page size for saving scanned data.
Specify the color mode of the data to be scanned.
Adjust the scanning density for originals.
Specify sides of the original to be scanned.
Confirm and register the current settings and print the
settings information.
Up to 10 frequently used settings can be registered.
Select the original type to perform the appropriate
image processing and save the scanned data.
Remove shadows that appear in the center of copies
when an open book is copied.
Specify the scanning size for originals to be scanned.
Specify this when the original has multiple sizes.
Adjust the color balance (CMYK) of originals.
Specify the image processing of the original.
Make the background color (base color) lighter so that
the text is easier to read.
Assign PIN codes when saving scanned jobs on the
internal hard disk.
Release the front door lock.
See
p. 3-9
p. 3-10
p. 3-10
p. 3-11
p. 3-12
p. 3-12
p. 3-13
p. 3-13
p. 3-13
p. 3-14
p. 3-14
p. 3-14
p. 3-14
p. 3-14
p. 3-14
p. 3-15
p. 3-15
ComColor Series User's Guide 01