Riso ComColor Series User Manual page 67

■ Loading the Next Copy Job
During copying, once scanning of the original has
been completed, you can begin scanning of
another original.
1
Press [Close] while the [Copying
in progress] screen is displayed.
2
Load the next original and press
the [START] key.
The message "Processing a job. Printing starts
automatically." is displayed and the original is
copied as the next job.
■ Canceling Copying
1
Press the [STOP] key.
The [Confirm] screen is displayed.
2
Press [Cancel].
Copying is canceled.
• To continue copying, press [Continue].
• To change the settings, press [Setting chg.].
When changing [Image position] and other
settings, see "Image Position" (p. 4-12) in
"Printer".
■ Changing the Settings During Copying
Åv
1
Press the [STOP] key.
The [Confirm] screen is displayed.
2
Press [Setting chg.].
The [Suspending] screen is displayed.
Overview of Copy Operations
3
Change Settings.
You can modify the following settings.
• Image position (p. 4-12 "Image Position" in
"Printer")
• Feed tray (p. 2-9 "Feed tray" in "Copy")
• Print density (p. 4-13 "Print density" in "Printer")
● To confirm the settings of the job, press
[Settings]. Press [ ] and [ ] to scroll the list.
● To configure the following settings, press
[Functions].
• "Paper guide control" (p. 2-50)
• "Jump wing control" (p. 2-51)
• "Head cleaning" (p. 2-51)
• "Front doors release" (p. 2-52)
4
Press [Proof] or [Print].
● When you press [Proof]
The page that was being printed when the [STOP]
key was pressed is printed using the new settings.
If the print result is satisfactory, press [Print].
● When you press [Print]
Copying of the job with changed settings starts.
ComColor Series User's Guide 01
2
2-5