Riso ComColor Series User Manual page 55

●
Continuous output
Switch the output tray automatically when the tray
is full. You must set [Output tray] to [Auto], and
[Collate] to [Group] on the [Finishing] tab.
An optional multifunction finisher or stacking tray
is required to use this setting.
●
Watermark
Add a watermark of the desired size and at the
desired position on printouts.
Select the [Watermark] check box and click [Details] to
display the [Edit Watermark] dialog box. Select the
character string in the Character string list and configure
the necessary settings.
The selected settings are immediately applied to the
preview image.
■ Applied page
[All pages], [First page only]
■ Character string
You can also add any character strings to use.
[Confidential], [Important], [Circulation],
[Reference], [Urgent], [Prohibited to copy]
● Adding a character string
You can also add a character string of up to 63
characters long.
Click [Add] under the list, and enter the character
string in the [Add] dialog box.
● Deleting a character string
Select the character string to delete from the list, and
click [Clear].
You cannot delete the factory preset character strings
(Confidential, Classified, Draft, etc.).
You need to have administrative authority for your
computer to add or delete a watermark character
string.
■ Character decoration
● Font
Select the font and style.
● Size
Specify the character string size between 1 pt and
600 pt.
● Color
Specify the color of the character string. Click
[Custom] to select a color from the color palette of the
operating system.
● Transparency
Specify the transparency of the character string. A
higher transparency setting means that the print data
will be more visible in the background of the
watermark character string.
● Frame
Specify the frame surrounding the watermark.
[None], [Circle], [Rectangle], [Double rectangle]
■ Print position
● Character angle
Select the angle of the text. You can also enter the
numerical angle of the text.
[Horizontal (0 deg)], [Vertical (90 deg)], [Vertical
(270 deg)], [Oblique (45 deg)], [Oblique (315 deg)],
[custom (0-360 deg)]
● Print position
Select the print position of the watermark. You can
also enter the values for the positions in the X and Y
directions.
[Center], [Upper left], [Upper center], [Upper
right], [Right center], [Lower right], [Lower
center], [Lower left], [Left center], [custom]
You can also use the mouse pointer to adjust the
position in the preview image.
ComColor Series User's Guide 01
Basic Settings
1
1-25