Mixed Size Original - Riso ComColor Series User Manual

2 Copy
The following paper sizes are not displayed among
the registered paper sizes on the original size list.
• Width (W):90mm - 303mm (3 9/16" -13")
• Height (H):148mm - 432mm (11 15/16" - 17")
●
Entering the Size of the Original
When the original is a non-standard size that is not
registered, specify the size of the original to be
scanned.
1
Display the [Scanning size]
screen.
Follow Steps 1 and 2 in "Specifying standard
paper or registered paper".
2
Enter the original size.
Press the input box of [Numerical input], and enter
the numbers using [ ] and [ ] or the numeric
keys.
Specify the size in a range of 90 to 303 mm (W) by
148 to 432 mm (H) (3 9/16" to 11 15/16" (W) by
5 13/16" to 17" (H)).
• To clear the fields, press the [Clear] key.
3
Press [OK].
The settings are confirmed and the previous
screen is displayed.
2-28

Mixed size original

Specify this option when loading originals with
multiple sizes.
● Only originals with one side of equivalent
length (A4 and A3, B4 and B5, Ledger and
Letter) can be scanned together.
● You cannot use "Mixed size original" and
"Booklet", "Book shadow erase", or "Multi-up"
at the same time. (p. 2-47 "Booklet", p. 2-29
"Book shadow erase", p. 2-30 "Multi-up")
1
Load the originals so that the
sides of equivalent length are
aligned.
2
Select [Auto] for [Feed tray].
For information on how to configure the feed tray
settings, see "Feed tray" (p. 2-9).
3
Press [Functions] on the copy
mode screen.
4
Press [Mixed size original].
"Mixed size original" is set.
• Press again to cancel the setting.
Original
orientation
ComColor Series User's Guide 01