Riso ComColor Series User Manual page 110

2 Copy
■ Center Margin and Auto Reduce
You can specify the center margin to the center of
folded sections to prevent the folded sections from
not being visible when folded in two. Specify the
center margin between 0 mm and 50 mm (1 15/16")
(in 1 mm units).
If a center margin you have specified would cause the
printed image not to fit on the sheet, you can
configure the image to be automatically reduced.
1
Press [Functions] on the copy
mode screen.
2
Press [Booklet].
The [Booklet] screen is displayed.
3
Select the booklet type.
When you have selected [Fold] or [Fold + Staple],
[Imposition] is set to [ON] automatically. To disable
Imposition, press [Imposition] and select [OFF].
4
Select the binding side.
5
Specify [Separate books].
2-48
6
Enter the center margin value.
• Press the input box and enter the number using
[ ] and [ ] or the numeric keys.
• To clear the fields, press the [Clear] key.
• If part of the printing area is missing due to the
center margin setting, press [Auto reduce].
7
Press [OK].
The settings are confirmed and the previous
screen is displayed.
ComColor Series User's Guide 01