Stamp Page/Date - Riso ComColor Series User Manual

●
Setting Multi-up (Single)
This imposes multiple copies of the same original
onto one sheet.
■ Original orientation
[Top side up]
Select this option when loading originals in an
orientation from which they can be read normally.
[Top side left]
Select this option when loading originals so that the
top of the original is aligned with the left edge.
■ Pages/sheet
Select the number of pages per sheet.
[2], [4], [8]
1
Display the [Multi-up] screen.
Follow Steps 1 and 2 in "Setting Multi-up".
2
Select the original orientation.
3
Press [Single].
[Output image] displays an output image that
reflects the settings.
4
Select the number of pages per
sheet.
5
Press [OK].
The settings are confirmed and the previous
screen is displayed.

Stamp Page/Date

Stamp the page number and date on the header or footer.
● The page number and date cannot be stamped
together in the same position.
● The page number and date cannot be stamped
on slip sheet paper or cover paper. (p. 2-40
"Add cover", p. 2-41 "Collate/slip sheet")
● When using this with "Multi-up", the page number
and date are stamped on each page of the copy
paper, not on the original page. However, when
using "Booklet", the page number and date are
stamped on each page after the booklet is created.
● Specifying the reproduction ratio does not affect
the stamped size of the page number and date.
●
Stamping the Page Number
Stamp the page number on the header or footer.
■ Stamp position
[Top L], [Top C], [Top R], [Bottom L], [Bottom C],
[Bottom R]
■ Transparency
[OFF]
Remove images in the stamp area to create a white
space, and stamp the page number in that white space.
[ON]
Stamp page number on top when the stamp area and
images overlap.
■ Start number
Specify the initial number to stamp (1 to 9).
■ Stamp start page
Specify the initial page to stamp (1 to 9).
Example: When the stamp start page has been set to
[2] and the stamp start number has been set to [3]
ComColor Series User's Guide 01
Copying Functions
2-31
2