Riso ComColor Series User Manual page 39

●
Zoom
Specify the enlarge/reduce ratio of the original.
Select the [Zoom] check box and enter the enlarge/
reduce ratio from 50% to 200%.
When the [Zoom] check box has not been not selected,
the enlarge/reduce ratio is selected automatically
according to the [Original size] and [Paper size] settings.
●
Paper size
Specify the size of paper for printing.
Select from the following.
[A3W], [A3], [A4], [A5], [A6], [B4], [B5], [B6],
[C4], [C5], [C6], [DL-R], [Envelope 1], [Envelope 2],
[No.10 envelope], [Foolscap], [Tabloid], [Legal],
[Letter], [Statement], [custom], [Same as original]
Envelopes cannot be outputted from the face
down tray. An optional stacking tray or
multifunction finisher is required.
This pull-down menu shows the sizes registered
with [Custom paper entry] on the [Environment]
tab. (p. 1-29 "Custom paper entry")
■ Specifying a Custom Paper Size
When the paper is a non-standard size, select [custom].
1
Select [custom] for [Paper size].
The dialog box for specifying the custom size is
displayed.
2
Enter the size of the paper.
Specify a width between 90 mm (3 9/16") and
340 mm (13 3/8").
Specify a length between 148 mm (5 13/16") and
550 mm (21 5/8").
3
Click [OK].
• To cancel the settings, click [Cancel].
The size entered here is only valid when
configuring the paper size. Registering frequently
used paper sizes can be useful. (p. 1-29 "Custom
paper entry")
●
Input tray
Specify the input tray to use for printing.
[Auto]
The feed tray is selected automatically according to
the [Paper type] and [Paper size] settings.
[Feed tray1] - [Feed tray3]
The paper loaded in the specified tray is used for
printing.
[Standard tray]
The paper loaded in the standard tray is used for
printing.
When [Auto] has been selected but the paper
matching the "Paper size" and "Paper type"
settings has not been loaded (or the paper is
loaded but [Manual] has been selected for [Tray
selection]), an error occurs and the job is not
printed. See "[Any]" (p. 1-10) in "Paper type".
You can use the RISO Console to confirm the
paper size and paper type loaded in the printer
feed tray. (p. 5-4 "[General] Screen" in "RISO
Console")
ComColor Series User's Guide 01
Basic Settings
1
1-9