Riso ComColor Series User Manual page 27

●
In the Standard Tray
1
Open the standard tray until it
stops.
2
Spread the guides.
Set the paper feed guide levers (in two positions
on both sides) to unlock the guides and slide the
guides.
3
Load the paper.
Load paper with the printing side face-up.
● Printing on envelopes requires a multifunction
finisher or stacking tray.
● Be sure to load an envelope with its flap open
and its bottom side entering the machine first.
YES
NO
4
Move the guides against the edges
of the paper, and push the lever to
lock.
5
Set the paper feed pressure
adjustment lever.
Normally, keep this lever in the "
position unless you set it to "
envelopes and similar paper.
6
On the operation panel, check the
tray settings (p. 2-9 "Feed tray").
When you have switched to a different type or size
of paper, update the feed tray settings.
The [Rotate] feature is convenient when printing
on envelopes from a computer.
ComColor Series User's Guide 01
Print Preparations
(NORMAL)"
(CARD)" for
25