1 Printer Driver
●
Offset output
Stack each print unit shifted apart from one another
when printing multiple copies.
[OFF]
Offset output is not performed.
[Between sets]
Stack each print unit, which is specified in [Collate],
shifted apart from one another.
[Between jobs]
Stack each print job shifted apart from one another.
● An optional multifunction finisher or face down
offset tray is required to use this setting.
● When you have selected [Between sets] or
[Between jobs], the following functions are not
available.
• "Booklet binding" (p. 1-18)
• "Paper folding" (p. 1-22)
• "Slip sheet" (p. 1-17)
• "Program" (p. 1-24)
When configuring program, there is an
"Offset output (Program)" setting for
[Details].
● This setting has been not available for paper
sizes that cannot be output to the face down
offset tray or stacking tray. (p. 2-42
"Configuring the Offset Output Setting" in
"Copy"
Normally, two-layer offsetting is used. When this
setting has been combined with "Staple", three-
layer offsetting is used.
Two-layer offsetting
Three-layer offsetting
1-18
●
Add cover
Specify this option to add a front and/or back cover.
Paper is added from a specified tray before or after
the data to be printed. Specify this option to use
colored paper or paper that differs from the pages
to be printed.
Select the [Add cover] check box and click [Details] to
display the [Details] dialog box. Select the [Put front
cover] and [Put back cover] check boxes, and select the
trays for the covers.
[Put front cover]
Insert a cover sheet before the first page.
[Put back cover]
Insert a cover sheet after the last page.
[Select front cover tray]/[Select back cover tray]
[Standard tray], [Feed tray1], [Feed tray2], [Feed
tray3]
● Specify the trays loaded with paper to be used
for the covers.
● When loading preprinted paper, it is
recommended that one set be printed to check
that the orientation matches that of the other
pages to be printed.
●
Booklet binding
Perform duplex printing for continuous multiple
pages to create a booklet with the paper folded in
two. The paper can also be bound in the middle
with staples.
Select the booklet binding method and click [Details] to
display the [Details] dialog box. Configure the [Separate
books], [Center margin], and [Booklet cover] settings.
The optional multifunction finisher is required to
use this setting.
ComColor Series User's Guide 01