Riso ComColor Series User Manual page 34

1 Printer Driver
●
1 Displaying the Printer Driver
Screen
1
Select the print option in the
application on the computer.
The print dialog box is displayed.
2
Confirm that this machine has
been selected for [Printer name]
and click [Properties] or [Details].
The button names are different depending on the
application.
●
2 Configuring the Settings as
Needed
For information on the settings that can be
configured, see "List of Settings" (p. 1-5).
• To restore all settings on the printer driver
screen to their default values, click [Restore
default].
• To cancel the settings, click [Cancel].
● When using a multifunction finisher
When [Staple], [Punch], and other items have
been grayed out on the [Finishing] tab, make
sure that the [Printer configuration] settings on
the [Environment] tab have been configured
correctly. (p. 1-28 "Environment Settings")
● The [Original image] and [Paper type] settings
of the printer driver greatly affect the print
quality. Change the settings according to use
conditions.
1-4
●
3 Click [OK]
The print dialog box is displayed.
When the [Collate] check box on the print dialog
box has been selected, remove the check mark. If
you do not remove the check mark, data is sent
from the computer to the machine the number of
times that copies are specified.
• Specify [Sort] in [Collate] on the [Finishing] tab
for collated printing.
●
4 Click [Print] or [OK]
Printing starts.
ComColor Series User's Guide 01