Riso ComColor Series User Manual page 72

2 Copy
2
Select the feed tray.
3
Press [OK].
The settings are confirmed and the previous
screen is displayed.
●
Changing the Feed Tray Setting
To change the tray setting, select a feed tray and
press [Change].
When changing the paper loaded in a tray, be sure
to change the [Feed tray] settings.
■ Paper size
[Auto]
Standard-size paper is detected automatically and its
size is displayed on the [Feed tray] screen.
Paper size selection
The non-standard paper sizes registered by the
administrator in advance are displayed. For the
standard tray only, the factory presets card and
envelope sizes.
If you use paper with a size not displayed, you
cannot obtain the correct printing result. In
addition, the inside of the machine may become
dirty with ink. Register non-standard paper before
using. For details, ask your administrator.
When using a tray loaded with special paper, it is
recommended that you set [Tray selection] to
[Manual]. (p. 2-12 "Configuring the [Tray
selection] Setting")
1
Press [Feed tray].
2
Select the feed tray.
2-10
3
Press [Change].
The [Paper size] screen for the selected feed tray
is displayed.
4
Select the paper size to use.
To configure the paper type, go to Step 2 in
"Paper type".
5
Press [OK].
The settings are confirmed and the [Feed tray]
screen is displayed.
ComColor Series User's Guide 01