●
Registering the Default Values
Register the current settings as the default values.
When login is not necessary, users other than the
administrator cannot register the default values.
1
Press [Check setting].
The [Check setting] screen is displayed.
Check the current settings.
2
Press [Save as default].
The current settings are registered as the default
values of copy mode for the user that is currently
logged in.
3
Press [OK].
The settings are confirmed and the previous
screen is displayed.
●
Clearing the Default Values
Return the registered default values to those set by
the administrator.
When login is not necessary, users other than the
administrator cannot clear the default values.
1
Press [Check setting].
2
Press [Initialize].
3
Press [OK].
The settings are confirmed and the previous
screen is displayed.
Save/Call setting
Frequently used settings information can be
registered and retrieved later as needed. You can
register up to 10 settings with multiple combined
functions.
You can also display the [Save/Call setting]
screen by pressing the [∗] key on the operation
panel in copy mode.
You can register the following settings in copy
mode.
"Copies" (p. 2-4)
"Original" (p. 2-12)
"Reproduction size" (p. 2-9)
"Feed tray" (p. 2-9)
"Color mode" (p. 2-8)
"Scanning level" (p. 2-13)
"Duplex/Simplex" (p. 2-14)
"Copy and pause" (p. 2-23)
"Save to folder" (p. 2-24)
"Save to archive" (p. 2-26)
"ADF scan & pause" (p. 2-27)
"Scanning size" (p. 2-27)
"Mixed size original" (p. 2-28)
"Book shadow erase" (p. 2-29)
"Multi-up" (p. 2-30)
"Stamp Page/Date" (p. 2-31)
"Image quality" (p. 2-33)
"Gamma control" (p. 2-34)
"Image control" (p. 2-35)
"Base color level" (p. 2-35)
"Program" (p. 2-36)
"Collate/slip sheet" (p. 2-41)
"Auto-Rotate" (p. 2-43)
"Add cover" (p. 2-40)
"Staple/Punch" (p. 2-43)
"Paper folding" (p. 2-45)
"Booklet" (p. 2-47)
"Output tray" (p. 2-49)
ComColor Series User's Guide 01
Copying Functions
2-19
2