Troubleshooting Tips - US Robotics SureConnect U.S. Robotics SureConnect ADSL Ethernet/USB Router User Manual

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
ENET1 or

Troubleshooting Tips

None of the LEDs illuminates when I turn on the router.
Router package.
The ADSL light is flashing or is not illuminated.
I can't connect to the router's configuration utility.
Possible Solution 1:
Possible Solution 2:
file:///P|/T_WRITER/Documentation/Released/9003%20(Guinness)/User%20Guide/9003%20(Guiness)%20prac%20template/troubles.htm (2 of 7) [11/6/2002 9:02:16 AM]
Flashing Green or
ENET 2
Orange
Off
On Green
USB
Flashing Green
Off
On Green
ADSL Flashing Green
Off
Check the connection between the power adapter, router, and wall outlet.
Confirm that you're using the power adapter that came with your U.S. Robotics SureConnect ADSL Ethernet/USB
Make sure that the telephone cable connects properly at the "ADSL" port on the rear of the router and at the phone
wall jack.
Make sure that your Ethernet or USB cables connect properly and securely.
Make sure that you've plugged in the power cord.
Make sure that your PC is using an IP address within the range of 192.168.1.2 to 192.168.1.254.
Make sure that the address of the subnet mask is 255.255.255.0.
Flowing data traffic.
Did not establish a physical connection between router and computer.
Established and detected a physical connection through the USB cable between
router and computer.
Flowing data traffic.
Did not establish a physical connection between router and computer.
Established a DSL link.
Negotiating a DSL link.
The DSL link failed.