US Robotics SureConnect U.S. Robotics SureConnect ADSL Ethernet/USB Router User Manual page 144

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
1.10 DHCPSERVER
The DHCP server commands are located in the "dhcpserver" directory.
1.10.1 start
Starts the DHCP server
1.10.2 stop
Stops the DHCP server.
The subnet and host commands are used to configure DHCP server. These commands are
available in the dhcpserver directory.
1.10.3 subnet
Configuration of DHCP to serve the specified IP addresses. The add option is used to
specify the IP addresses and other aspects of the configuration. The list option shows the
configured subnets. The delete command removes the serving of the specified subnet.
These commands take effect after the start command has been issued. These commands
are available in the dhcpserver directory.
subnet if add -o -subnet <subnet> [-netmask <mask>] -startip <startip> -endip
file:///P|/T_WRITER/Documentation/Released/9003%20(Guinness)/User%20Guide/9003%20(Guiness)%20prac%20template/cli.htm (20 of 71) [11/6/2002 8:58:45 AM]