Table of Contents
Advertisement
U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
file:///P|/T_WRITER/Documentation/Released/900...%20(Guiness)%20prac%20template/configexamp.htm (12 of 33) [11/6/2002 9:00:35 AM]
5. Click WAN Setup. The WAN Setup Window opens.
6. Below the Add button, notice the Current ATM PVC List. On this list, select any PVC that you
don't need.
7. Click Delete.
8. Click PPPoA.
9. Enter VPI and VCI values.
10. Select your desired encapsulation mode. Your choices are: LLC/SNAP and VC Multiplexing.
11. At Network Settings, enable NAPT and DHCP by selecting the appropriate boxes.
12. In the PPPoA box, enter your ISP-assigned username.
Advertisement
Chapters
Table of Contents
Troubleshooting
Need help?
Do you have a question about the SureConnect U.S. Robotics SureConnect ADSL Ethernet/USB Router and is the answer not in the manual?