Table of Contents
Advertisement
U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
Specifies the version of the RIP protocol that will be used. The permissible values are 1 or 2. The
default is 1.
ver -o <1|2>
1.11.3 list
Lists the routes currently available.
list
Note:
system is booted, these values will be in effect.
1.12 Bridge
The bridge commands are located in the "bridge" directory.
1.12.1 group
group <interface_name> <interface_name> -o -if <interface_name> -if <interface_name>
Assigns or groups two or more interfaces to the bridge.
interface_name The name of an interface e.g. eth0, eth1 , atm0 ,atm1 etc.
Examples:
bridge group eth0 -o -if eth1 -if usb0 -if atm1
The interfaces eth0, eth1 and usb0 are assigned to the bridge atm1.
bridge group eth0 -o -if atm0
The interfaces eth0, and atm0 are assigned to the bridge.
1.12.2 pvc
file:///P|/T_WRITER/Documentation/Released/9003%20(Guinness)/User%20Guide/9003%20(Guiness)%20prac%20template/cli.htm (24 of 71) [11/6/2002 8:58:45 AM]
For these new values to take effect, the configuration must be saved. The next time the
Advertisement
Chapters
Table of Contents
Troubleshooting
Need help?
Do you have a question about the SureConnect U.S. Robotics SureConnect ADSL Ethernet/USB Router and is the answer not in the manual?
Questions and answers