US Robotics SureConnect U.S. Robotics SureConnect ADSL Ethernet/USB Router User Manual page 116

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
configure, or delete PPPoE relays. From this menu, you can also check the status of a PPPoE
relay.
§ Client Interface
[eth0/eth1/ATM/usb0]
§ Server Interface
[eth0/eth1/ATM/usb0]
After you complete your configuration, proceed to the Basic Menu and enter 8. The Save &
Reboot Menu appears. From this menu, save your changes and reboot the router.
Relay Menu appears. This menu allows you to delete PPPoE Relay interfaces by providing an
interface name.
appears. This menu allows you to change PPPoE Relay Status between enabled and disabled.
Main Menu=>Advanced=>
IGMP Proxy
file:///P|/T_WRITER/Documentation/Released/900...9003%20(Guiness)%20prac%20template/tquicks.htm (34 of 42) [11/6/2002 8:58:14 AM]
List PPPoE Relay. Enter 1 at the PPPoE Relay Menu. The List PPPoE Relay Menu
appears. This menu displays variables for configured PPPoE relays.
Configure PPPoE Relay. Enter 2 at the PPPoE Relay Menu. The Configure PPPoE
Relay Menu appears. This menu allows you to set PPPoE relay variables. To configure
PPPoE relay variables, set these options...
Delete PPPoE Relay Interface. Enter 3 at the PPPoE Relay Menu. The Delete PPPoE
PPPoE Relay Status. Enter 4 at the PPPoE Relay Menu. The PPPoE Relay Status Menu
§ Vpi [0-255]
§ Vci [0-65,535]