Reset Change Engine Oil Interval Message; Using Est - Navistar International DT 466 Diagnostic/Troubleshooting Manual

Reset Change Engine Oil Interval
Message

Using EST

1. Turn the ignition switch to ON.
Figure 103 Select Service Interval session
2. Select PP_ServiceInterval.ssn from the Open
Session File window, and select OPEN to open
Vehicle Programming.
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
3 DIAGNOSTIC SOFTWARE OPERATION
EGES-270-1
Follow all warnings, cautions, and notes.
© August 2008 Navistar, Inc.
3. Click the right mouse button and select Enter
Password.
4. Enter password in the dialog box, select OK.
NOTE: If the password is not entered or is not
entered correctly, you will get an error message
indicating the password does not match, and the
service interval will not reset.
93