Navistar International DT 466 Diagnostic/Troubleshooting Manual page 213

1. Connect the EZ-Tech® interface cable to the EST
and the ATA connector.
2. Boot-up EST.
Figure 267 International® launchpad
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
6 PERFORMANCE DIAGNOSTICS
3. Select Engine Diagnostics, then International®
4. Turn the ignition switch to ON.
EGES-270-1
Follow all warnings, cautions, and notes.
© August 2008 Navistar, Inc.
MasterDiagnostics® II.
209