498
7 ELECTRONIC CONTROL SYSTEMS DIAGNOSTICS
The resets for the IST include:
•
PTO is active.
•
Engine speed is not at idle speed (700 rpm).
•
Vehicle movement or a Vehicle Speed Sensor
(VSS) fault is detected.
•
Engine coolant operating temperature is below 60
°C (140 °F).
•
Ambient air temperature is below 16 °C (60 °F) or
above 44 °C (110 °F).
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
•
Brake pedal movement or a brake switch fault is
detected.
•
Clutch pedal is depressed or a fault for the clutch
pedal switch is detected (manual transmissions, if
equipped with clutch switch).
•
Shift selector is moved from neutral or park
(automatic transmissions).
EGES-270-1
Follow all warnings, cautions, and notes.
© August 2008 Navistar, Inc.