Table of Contents
Advertisement
Figure 227 ICP Test Kit
1.
ICP sensor adapter
2.
Fitting, 13/16-16 NPT
Figure 228 High-pressure oil hose assembly
1.
High-pressure hose
2.
Fitting, 13/16-16 NPT
3.
ICP sensor adapter
4.
ICP sensor
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
5 HARD START AND NO START DIAGNOSTICS
Follow all warnings, cautions, and notes.
© August 2008 Navistar, Inc.
1. Make test hose assembly with the following
components:
•
ICP sensor adapter
•
High-pressure hose (Part No. - 1842571C91
or equivalent)
•
VT 365 ICP sensor (Part No. - 1845274C92
or equivalent)
NOTE: The mechanic is expected to keep the
spare ICP sensor and high-pressure hose for
future diagnostics. Expense the spare ICP sensor
and high-pressure hose as essential tools and
keep both with other diagnostic tools. Warranty
will not cover the cost of the spare ICP sensor
and high-pressure hose.
Figure 229 High-pressure pump fitting
2. Disconnect
high-pressure pump fitting.
NOTE: Oil will spill from hose.
high-pressure oil hose so oil will not spill.
EGES-270-1
high-pressure
oil
hose
Position the
189
from
Advertisement
Chapters
Table of Contents
