4
•
Do not expose batteries to open flames or sparks.
•
Do not smoke in workplace.
Compressed Air
•
Use an OSHA approved blow gun rated at 207
kPa (30 psi).
•
Limit shop air pressure to 207 kPa (30 psi).
•
Wear safety glasses or goggles.
•
Wear hearing protection.
•
Use shielding to protect others in the work area.
•
Do not direct compressed air at body or clothing.
Tools
•
Make sure all tools are in good condition.
•
Make sure all standard electrical tools are
grounded.
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
DIAGNOSTIC/TROUBLESHOOTING MANUAL
EGES-270-1
Follow all warnings, cautions, and notes.
© August 2008 Navistar, Inc.
•
Check for frayed power cords before using power
tools.
Fluids Under Pressure
•
Use extreme caution when working on systems
under pressure.
•
Follow approved procedures only.
Fuel
•
Do not over fill the fuel tank. Over fill creates a fire
hazard.
•
Do not smoke in the work area.
•
Do not refuel the tank when the engine is running.
Removal of Tools, Parts, and Equipment
•
Reinstall all safety guards, shields, and covers
after servicing the engine.
•
Make sure all tools, parts, and service equipment
are removed from the engine and vehicle after all
work is done.