Variable Geometry Turbocharger (Vgt) - Navistar International DT 466 Diagnostic/Troubleshooting Manual

Variable Geometry Turbocharger (VGT)

Figure 12 Variable Geometry Turbocharger (VGT)
1. Turbine outlet
2. Oil supply port
3. Compressor outlet
4. Compressor housing
The Variable Geometry Turbocharger (VGT) has
actuated vanes in the turbine housing. The vanes
modify flow characteristics of exhaust gases through
the turbine housing. The benefit is the ability to control
boost pressure for various engine speeds and load
conditions. An additional benefit is lower emissions.
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
1 ENGINE SYSTEMS
5. Turbine inlet
6. Turbine housing
7. Oil drain port
8. Compressor inlet
EGES-270-1
Follow all warnings, cautions, and notes.
© August 2008 Navistar, Inc.
9. Electrical connector and wire
10. Turbocharger control module
21