Table of Contents
Advertisement
C
5
HAPTER
FIGURE 33. Fold Tips Out - Lower Center Rack
Mono-Boom
8. Move the booms and center rack to the desired spray position. This is the position the boom will move to when
AutoFolding out. Note that the center rack height will be relearned each time an AutoFold in operation is
performed. Left and Right tilt will not be relearned.
FIGURE 34. Set Booms and Center Rack to Spray Position
RESET TO DEFAULTS
Selecting Reset to Defaults allows the user to reset AutoBoom XRT to factory default settings.
1. Press the Reset to Defaults button.
42
New Holland AutoBoom XRT Calibration & Operation Manual
Truss Boom
Advertisement
Table of Contents
