Raven New Holland AutoBoom XRT Calibration & Operation Manual page 32

C 5
HAPTER
FIGURE 5. Display Configuration
Selected
Readout
Desired Value
Drop-Down
2. Press Selected Readout in the desired area.
3. Select the desired value for that location from the drop-down at the bottom of the page.
4. Select the AutoFold Percentages option at the bottom of the page to view the current joint fold positions
instead of the AutoBoom sensor readouts on the AutoBoom XRT Main screen.
FIGURE 6. AutoFold Percentage Position Display
5. Select the Enable/Disable Readout option at the bottom of the page to replace sensor readings on the
AutoBoom XRT Main screen with large Auto/Manual toggle buttons. This can help the operator more easily
confirm whether a boom fold section is engaged or not during AutoBoom operation.
FIGURE 7. Toggle Auto/Manual
6. After all the Selected Readouts are configured, press Done.
26 New Holland AutoBoom XRT Calibration & Operation Manual
Done