Table of Contents
Advertisement
C
5
HAPTER
FIGURE 25. AutoBoom Fold Setup- Fold Boom In
3. Touch the Next button to continue the fold calibration.
4. Lower the center rack to a typical operating position and unfold the booms.
5. Touch the Next button to complete the fold calibration.
FIGURE 26. Vertical Center Sensor Calibration - Set to Spray Position
6. Unfold the booms and lower the center rack.
7. Touch the Next button to continue the fold calibration.
38
New Holland AutoBoom XRT Calibration & Operation Manual
Advertisement
Table of Contents
