Table of Contents
Advertisement
C
4
HAPTER
FIGURE 10. Height Sensor Setup
26. Press Next.
27. Repeat step 24 and step 26 for the remaining sensors.
28. Set the booms parallel and under 8 ft. [2.4 m] from the ground.
29. Press Next.
FIGURE 11. Height Sensor Setup - Set Booms Parallel
30. Raise the left boom until there is at least a 40 in. [101.6 cm] change in height.
31. Press Next.
20
New Holland AutoBoom XRT Calibration & Operation Manual
Advertisement
Table of Contents
