Table of Contents
Advertisement
8. Press Next.
9. Verify the machine is parked on a level surface.
FIGURE 4. Terrain Compensation Setup
10. Press Calibrate Terrain Compensation.
11. After terrain calibration compensation is complete, press Next.
NOTE:
If the AutoFold feature is unlocked and calibrated, the following steps will have been completed
during the AutoFold calibration. Skip to step 16 to continue the calibration process.
12. Fold the boom in so the booms are stored in the transport position.
13. Touch the Next button to continue fold calibration.
FIGURE 5. AutoBoom Fold Setup- Fold Boom In
016-0235-010 Rev. B
CALIBRATION
17
Advertisement
Table of Contents
