Table of Contents
Advertisement
4. When both booms are unfolded and level, touch the Next button to continue.
FIGURE 16. Height Sensor Setup - Set Booms Parallel
5. Raise the left boom.
6. When all sensors on the left boom have been raised above 8 ft. [2.4 m], the Next button will be displayed.
Touch the Next button to continue.
FIGURE 17. Height Sensor Setup - Raise Left Boom
7. Raise the right boom.
8. When all sensors on the right boom have been raised above 8 ft. [2.4 m], the Next button will be displayed.
Touch the Next button to continue.
016-0235-010 Rev. B
SETTINGS
33
Advertisement
Table of Contents
