Table of Contents
Advertisement
C
4
HAPTER
FIGURE 2. Height Sensors Detected
5. Press Next.
NOTE:
If the AutoFold feature is unlocked, AutoFold will be calibrated at this time. Refer to the AutoFold
Calibration section on page 39 for assistance with calibrating the AutoFold system. Once the
AutoFold calibration is complete, proceed with step 6 to continue the AutoBoom XRT calibration.
6. Verify the orientation of the ABM(ECU) on the machine matches the image on the ABM orientation page. If
needed, press the rotate buttons on the right side of the tab to adjust the orientation.
NOTE:
Many of the next screens will populate with default settings based on the machine configuration
selected earlier.
FIGURE 3. ABM Orientation
7. If required, press the Location button to rotate the machine view on the ABM Orientation screen.
16
New Holland AutoBoom XRT Calibration & Operation Manual
Advertisement
Table of Contents
