C
4
HAPTER
FIGURE 14. Base Control Effort Calibration
35. Press Next. The system will perform an automatic calibration sequence to determine the duty cycle required to
keep the boom stationary.
36. If prompted, manually raise or lower booms and press Next to continue calibration.
37. Review the information on the Height Sensor Setup page.
38. Press Next.
39. Review the information on the System Summary page.
40.Press Next.
41. The XRT Home Screen will be displayed.
NOTE:
If features are not visible on the XRT Home Screen, it means those features are locked. To unlock
these features, follow the directions in Chapter 6, Feature Unlock Codes.
22
New Holland AutoBoom XRT Calibration & Operation Manual