Table of Contents
Advertisement
CHAPTER
5
BOOM SPEED SETTINGS
The boom response to a manual button press may be set in the New Holland armrest display.
1. Navigate to the "Boom Speeds" page of the New Holland armrest display.
FIGURE 1. Boom Speeds page on Armrest Display
2. Move the slider up or down to achieve the desired boom response for each function. Increase the value for a
faster boom response. Reduce the value for a slower boom response.
NOTE:
The boom speed settings only apply to manual fold functions and do not impact AutoFold or
AutoBoom.
TILT FUNCTION BASE DUTY CYCLES
If the boom speed sliders are unable to achieve the desired speed adjustment for the tilt functions, complete the
following steps to adjust the base duty cycle.
1. Navigate to the "Boom Speeds" page of the New Holland armrest display.
2. Navigate to the wrench icon shown on the center section.
016-0235-010 Rev. B
S ETTINGS
C H A P T E R 5
23
Advertisement
Table of Contents
