Table of Contents
Advertisement
C
5
HAPTER
HEIGHT SENSOR UPDATES
The Height Sensor Updates page allows the user to update software on the height sensors. The sensors may be
updated individually by selecting each sensor and pressing Reprogram Selected. Alternatively, all sensors my be
programmed by pressing Reprogram All. Height sensor software is bundled with the XRT ABM software. No
external file is needed for updating height sensor software.
FIGURE 9. Height Sensor Updates
SWAP SENSORS
Press swap sensors to open the Height Sensor Swap screen. After physically swapping sensors on the machine,
select the two sensors that were swapped. Once both are selected, touch the Swap button.
FIGURE 10. Swap Sensors
28
New Holland AutoBoom XRT Calibration & Operation Manual
Swap
Advertisement
Table of Contents
