Connecting The Display More Than 25M From The Function Box - HP M2350A Service Manual

InstaJling the System
Installing the Components
5. Connect the AC power cord to the rear of the display.
6. Plug the power cord into wall power outlet.
7. Switch the monitoring instrument on, then the display. See the user's guide for the display
for a display perform-&e assurance test.
Connecting the Display more than 25m from the Function Box
0
5
Cable M1181A-#A23 1.5m or
Cable M1181A-#A24 3.0m
q-pin DM
5 BNC cables in wall
(RG8 or equ.) 0 _
E-pin DM
Dual Gang UP to 500 ft. Dual Gang
Faceplate
* . . . . . . . . . . . . . * Faceplate
Cable M1181-61664
Cable M1181-61665
15-pin DM
15-pin DF
1. Connect the lbpin Male connector on the 1.5m signal cable to the 15-pin Female connector
on the adapter cable.
2. Attach the 5 BNC connector of the adapter cable to the faceplate near the display.
3. Attach the 5 BNC connector of the M1181A-#A23 (or #A24) to the function box.
4. Connect the g-pin Male connector of cable M1181A-#A23 (or #A24) to the function box.
5. Connect the AC power cord to the rear of the display.
6. Plug the power cord into the wa.ll power outlet.
7. Switch the monitoring instrument on, then the display. See the user's guide for the display
for a display performance assurance test.
7-23